Xinmeng XM-RF87 User Manual

User Manual
Xinmeng (XM-RF87) Wireless Bluetooth Mechanical Manual
One. Product Features:
Xinmeng (XM-RF87) wireless bluetooth three-mode mechanical keyboard adopts three working
modes of Bluetooth-2.4G-wired to connect and control related equipment. The products can run
on computers Windows2000, WindowsXP, Vista, Win7, Win8, Win10. And the mobile phone
system with Bluetooth version.
2. Hardware requirements: a mobile phone or computer with Bluetooth and a USB port for
connecting the device.
Three, USB connection diagram
Fourth, the installation steps and use of Xinmeng RF87-87 key keyboard:
1. Keyboard Bluetooth connection code installation steps and use: press FN+1=BT1, FN+2=BT2,
FN+3=BT3 combination key is the keyboard Bluetooth broadcast code key, when you want to use
the keyboard's Bluetooth channel, Turn the power switch of the keyboard to the ON position,
when long press FN+1=BT1, the Bluetooth broadcast key, the keyboard Bluetooth code matching
light will flash green light quickly, when the Bluetooth code is connected, the light will stay green;
when long press FN +2=BT2 Bluetooth broadcast key, the keyboard Bluetooth code matching
light will flash yellow light quickly, when the Bluetooth code is connected, the light will stay on
yellow light; when long press FN+3=BT3 Bluetooth broadcast key, the keyboard Bluetooth code
matching The light will flash cyan light quickly. When the Bluetooth pairing code is connected,
the light will stay on cyan light. The product adopts three Bluetooth pairing methods for intelligent
identification and Bluetooth 3.0-4.0-5.0 standard communication. For example: when using on the
computer WIN-7, you should first click (start) on the computer and select "Control Panel" and
then click "Add Device". Then the computer will appear to add a device interface, then press the
keyboard FN+BT1 BT2., BT3 will perform code matching broadcast. When the keyboard icon
appears on the computer interface, click on the "Keyboard Icon" and then select "Add Device" and
follow the prompts, then the computer can be connected to the keyboard Bluetooth. Installation
steps on the computer WIN-10: Click "Start" on the computer, select "Device", select "Bluetooth"
and then select "Keyboard" in the list, and click the pairing and interface dialogue operation to
complete.
2. Keyboard 2.4G wireless installation steps and use: The keyboard can also be connected to the
computer with a receiver. When the keyboard power is turned on, long press the FN+4=2.4G key,
then the keyboard code matching light will flash red quickly, then It is necessary to plug the
receiver into a free USB port of the computer. At this time, the computer will automatically check
the code and install the corresponding adapting software. Generally, the computer will prompt; the
installation is complete and ready to use. At this time, the code matching light of the keyboard will
become long and bright red light, which means that the code matching of the keyboard with the
computer can be used successfully.
3. Keyboard wired installation steps and use: The keyboard can also be connected to the computer
with the equipped TYPE-C cable. When the line is plugged in, press and hold the keyboard