Advertisement
Quick Links
Instructions
We recommend you grab an extra set of hands and
construct your fire pit on a protected surface!
1. Preparation
2. Angulation
Lift
two panels
& fit the tab
of one into
the slot of
another.
3. Tilt-Action
4. Articulation
Have all
Fire-Away logos
facing the same
direction.
5. Up-Lifting
Slot
in the third
panel's tab,
pulling it firmly
up towards
you.
6. Tab & Slot Action
When
together,
push the panels
over onto their
Rotate the
side.
panel so that
all the centre
edges join.
7. Final Compilation
Standing
behind, push
tab firmly
down, into
the slot.
8. Stabilisation
Twist
two panels
anti-clockwise
to distribute
joints evenly.
If you are having trouble assembling your fire pit,
www.fire-away.com.au
to view an instructional video, or to contact the
Pull
the two top
edges out to
angle the last
tab into its
slot.
Having trouble?
please visit our website at
Fire-Away team directly.
Advertisement
Summary of Contents for Fire-Away Original Fire Pit
- Page 1 If you are having trouble assembling your fire pit, over onto their Rotate the please visit our website at side. panel so that www.fire-away.com.au all the centre edges join. to view an instructional video, or to contact the Fire-Away team directly.
- Page 2 PDJ Industries Pty Ltd Users of the product do so at their Release of liability own risk Outdoor fire pit By assembling the product, you agree that you have read and understood the entire product manual (the General warnings Safety instructions and “manual”) that was supplied with the product, including all •...
Need help?
Do you have a question about the Original Fire Pit and is the answer not in the manual?
Questions and answers