Table of Contents
Advertisement
Quick Links
USE WITH PROVIDED HARDWARE
Arrange pieces as shown and attach to the camera
body using the included screw and Allen wrench.
1/8"
Allen Wrench
1/4"-20 Screw
Metal Washer
Handstrap
Rubber Washer
IMPORTANT:
The rubber washer must be underneath the
SpiderPro Handstrap to prevent rotation.
The 1/4"-20 screw should be checked regularly
to ensure that it is tightened adequately.
USE WITH SPIDER PIN
Spider Pin
Metal Washer
Handstrap
Rubber Washer
IMPORTANT:
Spider Pin must be tightened with provided wrench.
checked regularly
Spider Pin should be
to ensure
that it is tightened adequately.
USE WITH SPIDER PLATES
Spider Camera Plates attach to the universal
tripod connection on the bottom of your camera.
(DSLR)
SPIDERPRO
Plate
(Mirrorless)
SPIDERLIGHT
Plate
USE WITH TRIPOD PLATES
SPIDER
SPIDER
SPIDER
ArcaSwiss +
ArcaSwiss
Tether
Manfrotto Plate
Plate
Plate
ANY Third
Party Tripod
Plate
IMPORTANT:
All tripod plates should be checked regularly
to ensure that they are properly tightened.
USE WITH SLING/SWIVEL STRAPS
Arrange parts as shown and attach to the camera body.
Connector
Metal Washer
Handstrap
Rubber Washer
IMPORTANT:
Remove any existing rubber washer
from the sling strap connector.
Using any third party connection
voids the warranty on this item.
Do not use the SpiderPro
Hand Strap as a handle
for grabbing or carrying
your camera.
Improper use can lead to damage of
this product and/or your equipment.
Read all instructions carefully, and
watch the installation and setup
video on our website.
MORE INFORMATION ONLINE
Visit our website at the link below:
SPIDERHOLSTER.COM/SPIDERPRO-HANDSTRAP-V2
SPIDERPRO
HAND STRAP v2
Adapter 1
Adapter 2
Adapter Screw x2
x2
Advertisement
Table of Contents
Related Manuals for Spider Gear SpiderPro Hand Strap v2
Summary of Contents for Spider Gear SpiderPro Hand Strap v2
- Page 1 USE WITH SLING/SWIVEL STRAPS USE WITH PROVIDED HARDWARE USE WITH SPIDER PLATES Arrange pieces as shown and attach to the camera Spider Camera Plates attach to the universal Arrange parts as shown and attach to the camera body. body using the included screw and Allen wrench. tripod connection on the bottom of your camera.
- Page 2 (1) year from the original date of purchase of the product. hand to access Pursuant to this Limited Warranty, Spider Gear will, at its camera controls. Eyelet Adapter 1 option, (i) repair the product using new or refurbished parts or Designed for smaller cameras with (ii) replace the product with a new or refurbished product.
Need help?
Do you have a question about the SpiderPro Hand Strap v2 and is the answer not in the manual?
Questions and answers