Advertisement
Quick Links
LINCOLN BACKLESS BENCH (BL)
Hardware Checklist
2 x 50mm (2") Bolt and Barrel
4 x 75mm (3") Bolt and Barrel
1x 4mm Allen Key
BEFORE ASSEMBLY
How to use fittings
Bolt and Barrel
Step 1: Insert barrel and line
up slot using a screwdriver
towards bolt.
Step 2: Insert bolt through hole
and rotate clockwise to engage
thread in the barrel.
LINCOLN BACKLESS BENCH (BL)
Component Checklist
2 x End Frames
1 x Bottom Tie Rail
2 x Seat Support Rails
1 x Seat
Advertisement
Summary of Contents for Jensen Leisure Furniture LINCOLN 6523
- Page 1 LINCOLN BACKLESS BENCH (BL) LINCOLN BACKLESS BENCH (BL) Hardware Checklist Component Checklist 2 x End Frames 2 x 50mm (2”) Bolt and Barrel 1 x Bottom Tie Rail 4 x 75mm (3”) Bolt and Barrel 2 x Seat Support Rails 1x 4mm Allen Key BEFORE ASSEMBLY How to use fittings...
- Page 2 LINCOLN BACKLESS BENCH Assembly Instructions Spread the end frames apart, align the seat with the slots inside the end frames and bring together. Fit the bottom tie rail between the side frames using the 2 x 50mm (2”) bolt & barrel (B). Do not fully tighten any bolts until the seat is in place.