Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Summary of Contents for NORMALUX C24
- Page 1 Central battery system · User guide P3658 _V5...
- Page 2 INDEX INTRODUCTION TECHNICAL FEATURES ASSEMBLY INSTRUCTIONS ELECTRICAL CONNECTION HOME INFO CONTROLS CONFIGURATION GENERAL NETWORK COMMISSIONING MODBUS INTEGRATION INDEX OF FAILURES INDEX OF WARNINGS...
- Page 3 INTRODUCTION C24i-300 is the addressable central battery system from the C24 family. The addressable version is able to control and monitor the status of each emergency luminaire connected to the outputs, while the conventional version can only control and monitor each output but not individual fittings connected to them.
-
Page 4: Technical Features
· Control capacity: Up to 120 fittings. · Dimensions: C24i-300: 587 x 460 x 187 mm. Normalux recommends the use · Type of fuse for the batteries: 16A · 250 V. twisted shielded wire for the output lines. Connect the ·... - Page 5 ASSEMBLY INSTRUCTIONS STEP Nº 1. Open the device and fix it to the wall by screwing four screws (not supplied) to the base. Make sure that the screws used are strong enough to support properly the device. STEP Nº 2. Once the electrical connection is done, close the door by turning and locking it with the key.
- Page 6 Note: the device is supplied by default with the door available to be opened to the left side. If you need the door to be opened to the right side, you have to change the colocation of the door, by following this operation.
-
Page 7: Electrical Connection
ELECTRICAL CONNECTION MODBUS MAIN POWER OUTPUTS LSSx INPUTS POWER - + - + - + - + - + - + - + - + Outputs 1-8 LSS1-8 SL OUT Aux in 1 Aux in 2 Aux in 3 Aux out 1 Aux out 2 Aux out 3 System work... -
Page 8: Home Screen
HOME SCREEN When connecting the central to the power supply, the “Home” screen appears. In this screen there is information about the status of the central as well as the status of the luminaires connected to it. There is information about: ·... -
Page 9: Info Screen
INFO SCREEN Pressing the second icon from the menu in the right, the INFO screen will be displayed. In this screen, there are several options to get info about the central or the fittings connected. + button will show outputs information. -
Page 10: Controls Screen
CONTROLS SCREEN Pressing the third icon in the right side of the screen, the menu with the different control options for the central is displayed: · F TEST. Carries out a functional test in the central. · D TEST. Carries out an autonomy test in the central. ·... -
Page 11: Configuration Screen
CONFIGURATION SCREEN Pressing the fourth button on the right side menu, the configuration menu will be displayed. Password is required (default password: 1234). In this menu, there are the following options: · GENERAL. To establish general parameters of the central (name, building, passwords, pre-selected autonomy, models of the batteries used, etc). - Page 12 COMMISSIONING TOOLS · General To set general parameters of the central: · Central name. · Building name. · Language. · Date/Time. · Passwords. · Models of the batteries used. · Pre-selected autonomy. · Self-protection. · Max discharge current. · Sound clic. ·...
- Page 13 COMMISSIONING TOOLS · Network To set network parameters of the central: · Network IP address. · Subnet mask. · Gateway. · DCHP. · E-mail options. · Modbus/IP. The central has a web server that allows its control from any computer connected to the same local network.
- Page 14 By pressing the magnifier glass buttons the fittings connected to each one of the outputs will be detected. The fittings provided by Normalux are programmed with an hexadecimal code that is used to identify each fitting. This code is printed in a sticker that is placed on a visible spot within the luminarie itself.
- Page 15 COMMISSIONING TOOLS · Commissioning tools A group is a set of emergency luminaires that can be connected to different outputs. Meaning that a group can include luminaires connected to different outputs. The system allows the creation of a maximum of 16 groups. Select the group number you want to coonfigure and then, the fittings you want to add to the group.
- Page 16 COMMISSIONING TOOLS · Commissioning tools It allows to control the maintained mode of the fittings per output when there is power supply. LSSx are 230 Vac · 50 Hz inputs tha controls outputs. For example, if LSS1 is +, it means that Input nº1 has voltage.
- Page 17 COMMISSIONING TOOLS · Commissioning tools It allows to define how the system will behave when receiving a signal from any of the auxiliary inputs. There are three inputs in the central: I1, I2 and I3. Each input has two different status: contact open or close. You can set a type of device connected to the Aux input (toogle or push buton) and link it to a scene.
- Page 18 COMMISSIONING TOOLS · Commissioning tools C24i allows to configure up to 16 scenes. A scene is a list of actions or commands. You can set the name of the scene, the list of actions and press “run” to try the scene programmed. You will be able to: ·...
- Page 19 INDEX OF FAILURES DESCRIPTION FAILURE TYPE F0_FUSIBLE_BAT1_BROKEN Shows that the fuse of battery 1 is broken. F1_FUSIBLE_BAT2_BROKEN Shows that the fuse of battery 1 is broken. F2_BAT1_DESCONECTADA Shows that battery 1 is disconnected. F3_BAT2_DESCONECTADA Shows that battery 2 is disconnected. F4_FUSIBLE_INPUT_BROKEN Shows that the input fuse is broken.
- Page 20 INDEX OF FAILURES DESCRIPTION FAILURE TYPE F30_INPUT_CONTROL_ERROR Shows that the control logic of the input power is reporting a problem. F31_INPUT_CONTROL_ERROR Shows that the control logic of the battery is reporting a problem. F32_AUTONOMÍA Shows that the batteries are not able to satisfy the requested autonomy. INDEX OF WARNINGS WARNING TYPE...
- Page 21 INDEX OF WARNINGS DESCRIPTION FAILURE TYPE Shows that the power in output 5 is over 85W. W95_POWER_OUT5_OFF_RANGE Shows that the power in output 6 is over 85W. W96_POWER_OUT6_OFF_RANGE Shows that the power in output 7 is over 85W. W97_POWER_OUT7_OFF_RANGE Shows that the power in output 8 is over 85W. W98_POWER_OUT8_OFF_RANGE...
- Page 22 Headquarters Parque Tecnológico de Asturias. Parcela 10 33428 Llanera (Asturias) Spain T. +34 985 267 100 F. +34 985 266 992 Emergency lighting normalux.com...