TABLE OF CONTENTS Introduction Step 1 – Order a data plan Step 2 – Installation Step 3 – Create an account on web tracking platform Step 4 – Download the phone app Warranty Technical assistance...
Telstra 4G Cat-M1 network, which has the most coverage of Australia. A data plan is required before the EAGLE can start tracking. The data plan is ordered via the iTrackers website – refer to Step 1.
(not in a garage or warehouse). After you have plugged the EAGLE into the OBDII port, take vehicle for a 20 minute drive to allow the EAGLE to calibrate to its actual location. Do not disconnect for 6 hours after first connection.
STEP 3 – CREATE AN ACCOUNT ON WEB TRACKING PLATFORM Once you have installed your EAGLE, the next step is to create an account on our web tracking platform and add your EAGLE to it. To access the web tracking platform, go to https://web.itrackers.com.au...
Page 7
Next enter the IMEI number of your EAGLE in the IMEI field. The IMEI number uniquely identifies your EAGLE and can be found on the top of your EAGLE. Please ensure you enter the correct IMEI number. Once you have done this click the Save button.
Page 8
Note the status icon will most likely be grey which means the EAGLE does not have a 4G Cat-M1 connection and GPS signal. Ensure the...
STEP 4 - ITRACKERS PHONE APP The iTrackers phone app allows you to monitor your vehicle, track its location and view location history. This is for both iOS and Android devices. Click on the button below to download the phone app depending on your smartphone type.
WARRANTY The EAGLE comes with a 12 month warranty from the date of purchase. The warranty is void if it has been determined the EAGLE has not been used as per these instructions. The EAGLE is not waterproof so any water damage will void the warranty.
Need help?
Do you have a question about the EAGLE and is the answer not in the manual?
Questions and answers