Summary of Contents for Kinlan BE1030
- Page 1 Wireless Earbuds with Charging Case USER MANUAL MODEL: BE1030 Please read this manual carefully before using the product and keep it in a safe place.
-
Page 2: Packing List
PACKING LIST (Size M is preinstalled on earbuds) Wireless Earbuds with Charging Case USER MANUAL MODEL: BE1030 Please read this manual carefully before using the product and keep it in a safe place. User Manual X1 Quick Guide X1... - Page 3 DIAGRAM LED light Type-C charging port LED Indicator Microphone port Charging pins Touch area...
- Page 4 CHARGING • Remove the protective film from the earbuds when using for the first time. • Fully charge both earbuds and the charging case before the first-time using. • To prevent damage, use the provided USB-C cable. • Fully dry off the earbuds and the USB port before charging.
- Page 5 POWER ON Mode 1 • Take both earbuds out from the charging case the earbud will automatically turn on (with white LED lights flashing) and start pairing. Mode 2 x 3s • In the shutdown status and when the earbuds are not in the charging case.Simultaneously click and hold the MFB of both earbuds for 3 seconds to power on and go into pairing mode (with the white LED lights flashing).
-
Page 6: Power Off
POWER OFF Mode 1 • Put the earbuds back to the charging case to turn them off. Mode 2 x 4s • If the earbuds are not in the charging case. Pause music first, click and hold the MFB of both earbuds for 4 seconds to turn them off. - Page 7 2. If the earbuds are not in the charging case.Click and hold the MFB of both earbuds for 6 second s. they will automatically enter the pairing mode and then select "BE1030"on your phone. Note :The earbud will reconnect to the paired device by priority.
-
Page 8: Touch Control
TOUCH CONTROL Volume UP/Down Volume+: click and hold the MFB button of Left earbud to turn up the volume. Volume-: click and hold the MFB button of Right earbud to turn down the volume . Next / Previous Track Next Track: double click the MFB of Right earbud. Previous Track: double click the MFB of Left earbud. -
Page 9: Specification
SPECIFICATION Earbuds Wireless version: V 5.1 Working distance: 10M (barrier-free) Battery: 50mAh Working time: 4~6 hours Charging time: 1.5hous Charging case Battery: Li-battery 700 mAh (Extra 4 times full charge for earbuds) Chaging times: 2 hours Input: 5V 1A Out put: 5V 120mA... -
Page 10: Fcc Warning
FCC Warning This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. NOTE 1: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
Need help?
Do you have a question about the BE1030 and is the answer not in the manual?
Questions and answers
集音機としての使用方法
The Kinlan BE1030 earbuds have a built-in microphone that activates automatically during calls. To use them as a microphone:
1. Pair the earbuds with your phone via Bluetooth by holding the MFB buttons on both earbuds for 6 seconds until they enter pairing mode, then select "BE1030" on your phone.
2. Once connected, use the earbuds during phone calls. The microphone will function automatically.
3. To answer or hang up a call, click the MFB button on either earbud once.
4. To reject a call, double-click the MFB button when there is an incoming call.
No additional steps are needed to enable microphone use.
This answer is automatically generated