Summary of Contents for Calscan Falcon
- Page 1 780.897.5869 BURKECALIBRATION.COM Calscan Falcon Electronic Deadweight Questions? Call us at 780-897-5869 or email info@burkecalibration.com...
- Page 2 Falcon with a Under 4 inches in diameter, the range of 3500 psi, tested at 1000 psi Falcon will fit in your hand and, yet, of pressure. The temperature was then hold most standard quick-connects ramped from –20°C to +20°C in 1 and fittings.
- Page 3 Specifications are subject to change due to a policy of continuous improvement. This product not restricted under DOT and LATA shipping regulations. For warranty, calibration, replacement battery, and local distributor information contact: E-mail: sales@calscan.net Website: www.calscan.net Phone: (780) 944-1377 4188 93 Street, Edmonton, Alberta, T6E 5P5...
- Page 4 User’s Manual 1v06 Overview The Falcon Electronic Deadweight is a quick and inexpensive way to measure static pressure. Since it’s calibrated from -40 °C to +60 °C you don’t have to worry about the outside temperature changes affecting the pressure, unlike most other electronic deadweights.
-
Page 5: Installation
There are just a few points to remember. Installing Fittings The Falcon is designed to be robust but, if you do not use a wrench to attach any fitting or install the deadweight on a pressure source, you could damage it. - Page 6 2 pounds of pressure, it will shut off after 5 minutes of inactivity. If the Falcon has been set to ton, it will shut off in 5 minutes, after you stop pressing any of the buttons.
-
Page 7: Battery Replacement
Battery Replacement The supplied battery pack is designed to operate the Falcon across its temperature range, and protect it from the possibility of causing a spark. Replace only with Cal-Scan Services Battery pack model: LS14500/2BPW Failure to use replacement battery pack LS14500/2BPW will impair the...