Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Summary of Contents for BUDDAH TEK ROVER 1
- Page 1 U S E R M A N U A L *Shown here with PlayStation PS4 Slim not included.
- Page 2 Anti-glare IPS widescreen monitor • HDMI In, HDMI Out for pass though play to external monitor, USB powered from console • Built in 3 watt passive radiator subwoofer ROVER 1 PORTABLE HDMI CABLE 4 INCH dynamic sound speakers and dual GAMING STATION (10.1CM) 3.5mm headphone jacks with Bluetooth...
- Page 3 Place both hands on the sides of Slide out the locking bar until it stops to remove manufacturer’s the ROVER 1. Using your thumbs, Accessory Box and PS4 Slim Tight Fit Panel (if applicable). warranty before unlock the lock latches by sliding Using both hands, pull Accessory Box out by the tab and using the ROVER 1.
- Page 4 NOTE: Keep console loaded and play on a TV screen or monitor. Connect the HDMI Out from the console to the HDMI In of the TV or monitor. Close the ROVER 1 screen. The picture and sound will now bypass the ROVER 1 and be routed to external source.
- Page 5 In the back of the unit, attach the HDMI Out of the Playstation to touching the front of the Playstation. Secure the the HDMI In of the ROVER 1. In the front, insert the dual USB cable bar in place by pushing both locks inwards.
- Page 6 To choose Bluetooth as the audio source, connect by pressing the button until it starts flashing blue. Choose ‘ROVER 1’ as the discoverable device on smart phone or Bluetooth audio device. The light will turn solid blue when paired successfully.
- Page 7 POCKET. CABLE / ACCESSORY STORAGE WATERPROOF ZIPPER FOR WEATHER RESISTANCE CONTROLLER STRAPS R1 Messenger Bag PADDED ROVER 1 / CONSOLE COMPARTMENT To store your ROVER 1, first turn off unit and unplug the HDMI and USB power cables. Load unit in messenger bag bottom down, lock bar facing up.
Need help?
Do you have a question about the ROVER 1 and is the answer not in the manual?
Questions and answers