Advertisement
1.
Place STENCIL A in desired position as shown below left. Using thin sized brushes, paint
stencil, using small amounts of paint on brush for each coat. Repeat 1-2 more times to
achieve desired vividness, drying after each application, and remove stencil.
Pavement should like lower right.
2.
After completely dry, align STENCIL B as shown below.
© 2017 FIT AND FUN PLAYSCAPES, LLC
APPLICATION INSTRUCTIONS
FOR THE
BUDDY CIRCLE
Product Number: 17-2W-060
SIZE: diameter approximately 7 feet.
ESTIMATED PAINT TIME: 1-4 people for 1-4 hours.
READ FIRST: Completely read "General Instructions".
Prepare surfaces as recommended before painting.
1 of 2
Advertisement
Table of Contents
Summary of Contents for FIT AND FUN PLAYSCAPES BUDDY CIRCLE
- Page 1 Repeat 1-2 more times to achieve desired vividness, drying after each application, and remove stencil. Pavement should like lower right. After completely dry, align STENCIL B as shown below. 1 of 2 © 2017 FIT AND FUN PLAYSCAPES, LLC...
- Page 2 Pavement should like below and is complete. Allow to dry for 24 hours before use. Any questions? We’re here to help – call us at (800) 681-0684! THIS INFORMATION IS COPYRIGHT MATERIAL. ALL RIGHTS ARE RESERVED. 2 of 2 © 2017 FIT AND FUN PLAYSCAPES, LLC...
Need help?
Do you have a question about the BUDDY CIRCLE and is the answer not in the manual?
Questions and answers