How To Change Your Patches; How To Remove Your Face Cover; How To Clean Your Face Cover - Xupermask XUPERFAB User Manual

IN STRU CT IO N S
6. Mold the nose area to the shape of the face by pinching the top nose piece.
7. Insert your earbuds by sliding the ends of your earbuds into the rubber holder.
8. Connect the two ends of the earbud holders in front of your chest by using
the embedded magnets.

HOW TO CHANGE YOUR PATCHES

1. Remove patch by pulling on the patch and separating the hook and loop.
2. Store your patches on the box panels.

HOW TO REMOVE YOUR FACE COVER

Be careful not to touch your eyes, nose, or mouth when removing face cover or filter insert.
Wash hands immediately after use.
1. Stretch the ear loops and lift over ear and pull neck strap over head.
2. Remove single use filter insert and dispose of properly. Do not wash the filter insert.
3. To safely discard the used filter insert, place it in a plastic bag and put it in the trash.
HOW TO CLEAN YOUR FACE OVER
Remove filter insert and patches before cleaning.
Hand wash face cover with mild soap and warm water. Do not bleach. Do not tumble dry.
Do not dry clean. Do not iron. Hang or lay flat to dry.