Service Ideas 100009 Cleaning Instructions

DEVICE

MAINTENANCE

CLEANING INSTRUCTIONS
• Ensure server is empty prior to removing spigot.
• Do not disassemble spigot while it is attached to
server.
• Do not submerge or pour water over electrical
housing.
STEP 1: LIFT PIN. WHILE PIN IS HELD UP YOU WILL BE
ABLE TO ROTATE SPIGOT BODY

STEP 3: REMOVE SPIGOT BODY

(Spring pin returns to normal position)
•Spigot seal assembly is removable. Do not remove spring from stainless
steel core.
•Silicone seal can be rinsed clean or replaced if necessary.
UP NEXT: CLEANING INSTRUCTIONS CONTINUED

EXAMINE THE UNDERSIDE OF THE SPIGOT

Note the location of (A) spring loaded pull pin and
(B) alignment marks.
A

STEP 2: ROTATE SPIGOT BODY COUNTER CLOCKWISE

TO REMOVE SPIGOT BODY
NOTE: CARE MUST BE TAKEN TO NOT DAMAGE SPIGOT SEAT
(Use a soft, non-abrasive cloth to clean)
1
100009
(Patent pending)
B
100009