PRODUCT SPECIFICATION QUICK START GUIDE PACKING LIST Dimensions 176×99×349mm POWER ON Weight 0.94kg Take out the robot carefully from the box and place it on a flat surface; Robot X1 Press and hold the power button until the device says “Hello, Humanity.”...
Page 4
QUICK START GUIDE QUICK START GUIDE CONTROL VIA APP CONTROL VIA VOICE Ensure your mobile device’s Bluetooth is Turn on the robot. Turn robot. Say “Hey, K One” to enter Voice Control mode. The “I’m here.” robot will respond, Open the device app, then tap the Connection Icon located on the top right-hand See the Voice Command Card for more preset voice commands;...
Advanced Programming Mode ‒ 3D: voice programming to make robot perform a series of motions. Robosen researched and developed a new type of programming model, which can easily adjust each Control the robot through the on the smart device. joint of the robot in real-time.
SPECIAL FUNCTION INSTRUCTION SPECIAL FUNCTION INSTRUCTION VOICE PROGRAMMING (NOT BLUETOOTH CONNECTED) VISUAL VOICE PROGRAMMING (BLUETOOTH CONNECTED) Open the device and ensure that the robot has successfully connected with the app through Bluetooth on your Say “Hey K One” to device. Wait for the device to respond“I’m here”, say “Start programming”...
④Ensure you are in a quiet setting with minimal background noise. Log in to our official website (www.robosen.com) or use your phone app to check out our Tutorial WHY CAN’T K1 KEEP ITS BALANCE WHEN IT IS WALKING OR DOING OTHER ACTIONS ?...
Page 8
TROUBLESHOOTING WARNINGS Q: THE ROBOT DOES NOT POWER ON ? ①Ensure the Robot is fully charged. Charge the Robot fully and power on ; ②Press and hold the power button until the T9 says“Hello Humanity.” Q: APP CANNOT CONNECT TO THE ROBOT ?...
Don't leave machine Please refer all non-routine servicing questions to Robosen Robotics Inc. in your car, because temperatures in parked cars can exceed this range. When you're using machine or charging the battery, it is No user-serviceable parts are contained inside.
• Never charge a leaky battery or one that has been damaged. Do not use the supplied charger/cables to charge any other device. airports, trains). Check whether use of machine is permitted before using it in public areas or public transport. •...
Damage caused by accidents, misuse, abuse, neglect, misapplication, fire, water, lightning or other acts of nature; incorrect electrical • Robosen will repair or replace this product, at our option and at no charge with new or reconditioned parts, if found to be defective...
Page 12
THIS PRODUCT, IS NONTRANSFERABLE AND STATES YOUR EXCLUSIVE REMEDY. in this guide are correct at the time of printing. Robosen reserves the right to amend or improve the product design or user g Some states do not allow limitations on how long an implied warranty lasts, or the exclusion or limitation of incidental or consequential without any restrictions and without any obligation to notify users.
Page 13
harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the FCC regulatory conformance : interference by one or more of the following measures: - Reorient or relocate the receiving antenna.
Page 14
minimum distance of 20 cm between the radiator and your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
Need help?
Do you have a question about the Interstellar Scout and is the answer not in the manual?
Questions and answers