Advertisement
Quick Links
How to use
iSwitch:
1.
Pair your iSwitch to your iPad via Bluetooth. Press any button on your iSwitch to wake it.
When the iSwitch is looking for a device to pair with, the LED display box will show moving
lights. On your iPad go to "Settings" then "Bluetooth". You should see an option named
iSwitch followed by a series of numbers (the unique number series is stated on the label on
your bottom of your iSwitch). Click on that to begin the pairing process.
2.
The iSwitch has the integral switch as well as 2 sockets in the back for plugging in addition-
al switches. The default settings for the integral switch and each of the sockets are as follows:
Switch — Space
Socket 1 – Enter
Socket 2 — Home
The default settings cover many switch accessible apps, including all HelpKidzLearn and Inclu-
sive software (space and enter).
Inclusive TLC
704-243-3622
www.inclusivetlc.com
Advertisement
Summary of Contents for Inclusive TLC iSwitch
- Page 1 Pair your iSwitch to your iPad via Bluetooth. Press any button on your iSwitch to wake it. When the iSwitch is looking for a device to pair with, the LED display box will show moving lights. On your iPad go to “Settings” then “Bluetooth”. You should see an option named iSwitch followed by a series of numbers (the unique number series is stated on the label on your bottom of your iSwitch).
- Page 2 You may want to change the settings to one of the 24 other commands that work with the iSwitch. These commands are shown on the cheat sheet on the bottom of the unit, along with a letter or number code for each. For example, you may want to take a picture using the cam- era, which is set by sending a “volume up”...
- Page 3 To bring up the on-screen keyboard when an iSwitch is paired with an iPad, press the MODE button (there is an image of a keyboard above this button). To get out of the on-screen keyboard, press and hold the MODE button again.
- Page 4 Whenever the iSwitch is idle for 30 minutes, it will automatically go into sleep mode. Press any button or switch to wake it again. If you wish to power down the iSwitch so switches can- not be accidentally activated (ideal when transporting the unit and switches can be banged around), press and hold the CHAN button until the “1”...