I:\DOKU\Fasel\FCU-EXT\DISPLAY\Modul\Ext-Display_Kurzanl_ohne_Symbole_EN
Brief instruction for the operation of the internal display
Some menus are available only if the corresponding bathing options or other options
are available.
Keys
Display
20. 0 0
50°
50°
50r. H .
F 5
50r. H .
F 5
06. 0 0
06. 0 0
LI 1
...
LI 9
OFF
FCU-EXT\DISPLAY_Kurzanl.pdf
FASEL GmbH
FCU-EXT-DISPLAY-TOUCH
Info
LED does not glow: you are in the standard display menu of the actual
values, here e.g. time
The LED
As long as this LED glows you are in the menu for changing the nominal
values. After some seconds without operating the key board, the program
automatically returns to main screen and the LED
The LED
Display of the nominal temperature
The LED
With the keys
the values press the key
The LED
If there is a humidity sensor then the nominal humidity is displayed e.g.
50r.H. or e.g. F 5 if there is no humidity sensor (Interval humidity).
The LED
With the keys
the values press the key
The LED
The heating duration is displayed
The LED
With the keys
store the value press the key
OFF
The LED
Display for light ON/OFF or the dimmer level
The LED
With the keys
set the brightness. To store the value of the brightness press the key
The LED
Display for the blower ON/OFF or the blower level
Technische Änderungen vorbehalten
glows:
glows
blinks
and
you can set the desired temperature. To store
glows
blinks
and
you can select the desired humidity. To store
glows
blinks
and
you can set the desired duration of heating. To
glows
blinks
and
you can switch ON or switch OFF the light or
glows
Stand: 06.09.2013
goes out.
Seite 1 von 3