abrastar LHAU150 Operator's Manual

LHAU150
LHAU1502.5
Operators Instructions
Includes – Please Read and Comply, Parts
Page, Parts List, Proper Use of Tool, Work
Stations, Putting the Tool into Service, Oper-
ating Instructions.
Required Personal Safety Equipment
OIL DAILY
Oil daily for superior
performance.
1) General Industry Safety & Health Regulations, Part
1910, OSHA 2206, available from: Superintendent of
DC 20402
2) Safety Code for Portable Air Tools, ANSI B186.1 avail-
able from: American National Standards Institute, Inc.;
1430 Broadway; New York, NY 10018
3) State and Local Regulations.
Key parts of the above regulations are excerpted below.
They are not intended to be inclusive. Study and com-
ply with all regulations.
1) TOOL INTENT – Tool shall be used only for purposes
intended in its design.
LHAU150
LHAU1502.5
Safety Glasses
Safety Gloves
Recommended Airline
Size - Minimum
10 mm
Please Read and Comply
OPERATOR'S MANUAL FOR
12,000RPM 5 in. and 6 in.
RANDOM ORBITAL SANDERS
Important
Read these instructions carefully before installing,
operating, servicing or repairing this tool. Keep these
instructions in a safe accessible location.
Breathing Masks
Recommended Maximum
3/8 in
8 meters
2) AIR SUPPLY – Test and operate tools at 90 PSIG (6.2
Bar) maximum unless tool is marked otherwise. Use
(FRL).
3) UNUSUAL SOUND or VIBRATION – If tool vibrates
or produces an unusual sound, repair immediately for
correction.
4) OPERATOR PROTECTIVE EQUIPMENT – Wear
goggles or face shield whenever tool is in operation.
Other protective clothing shall be worn, if necessary.
SEE REGULATIONS.
5) SAFETY MAINTENANCE PROGRAM – Employ a
safety program to provide inspection and maintenance
of all phases of tool operation and air supply equip-
ment in accordance with "Safety Code for Portable Air
Tools."
Ear Protection
Hose Length
25 feet
Rev 04/2020