Advertisement

Quick Links

* Note: Please make sure that both
the Main Unit and the Outdoor Sensor are
power on within 3 minutes. If the Main Unit
is powered for over 3 minutes without the
sensor on, it will not pair with the Outdoor
Sensor or receive signal anymore.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the S657 and is the answer not in the manual?

Questions and answers

tullio kus
July 15, 2025

Come si cambia la lingua del giorno corrente

Summary of Contents for Doveet S657

  • Page 1 * Note: Please make sure that both the Main Unit and the Outdoor Sensor are power on within 3 minutes. If the Main Unit is powered for over 3 minutes without the sensor on, it will not pair with the Outdoor Sensor or receive signal anymore.
  • Page 2 Instruction Manual Seven Keys: DOWN, MODE, SNOOZE/LIGHT, CHANNEL, UP, ALERTS, ALARM. 1. Display Unit • 12/24 h Time and Date.(Press “DOWN” key to switch) • Dual alarms. • Snooze function (snooze interval optional from 3 minutes to 20 minutes,default: 5 minutes). •...
  • Page 3 Tips: • The default channel of outdoor temperature sensor is "ChT'. Open the battery cover of sensor and remove the batteries can switch the channel. (The Outdoor Temperature Sensor) • Under cycle display mode, The display would show outdoor temperatures from connected channels cyclically.
  • Page 4 The weather station displays the following weather symbols: FORECAST FORECAST FORECAST FORECAST → → SUNNY SUNNY AND CLOUDY FORECAST FORECAST FORECAST FORECAST FORECAST → → → → CLOUDY RAINY FORECAST FORECAST FORECAST FORECAST → → HEAVY RAIN SNOWY 3.6 RCC(Radio-controlled clock) Receiving Function Tips: To more accurately receive the WWVB radio, please place the station in a appropriate position.
  • Page 5 3.7 UP KEY • Under time mode, press “UP” key to switch °C/°F display. • Under time, date, temperature alert, snooze mode, press “UP” key to go forward one step, press and hold “UP” key a few seconds to go forward 8 steps per second. •...
  • Page 6 (Snooze Interval Time Setting Display) • Press “Up” key, the value will go ahead 1 step, press and hold “UP” key for 2 seconds, the value will go ahead at an 8 step/second speed. • Press “DOWN” key, the value will go back 1 step, press and hold "DOWN" key for 2 seconds, the value will go back at an 8 step/second speed.
  • Page 7 • Press “DOWN” key, the value will go back one step; press and hold for 2 seconds, the value will go back at an 8 step/second speed. After setting, press “ALERTS” to confirm. • If no key is pressed for 10 seconds, system will exit automatically to set status. 4.4 Tips •...

Table of Contents

Save PDF