Advertisement
Quick Links
[/lommy pro T
Quick Start Guide
Lommy Pro T
Congratulations on your new Lommy Pro T
This guide will give you a short introduction
to the functions and fitting of the unit.
Lommy Pro T overview
1. Hole for mounting
2. On/off button
3. Light indicator showing the
status of the Lommy
4. USB-port for charging
5. Connection to installation kit
For technical questions, please contact Flextrack Support:
support@flextrack.dk
www.flextrack.dk
]
2
Quick Start Guide
4
1
3
5
1
Advertisement
Summary of Contents for Flextrack Lommy Pro T
- Page 1 Quick Start Guide [/lommy pro T Quick Start Guide Lommy Pro T Congratulations on your new Lommy Pro T This guide will give you a short introduction to the functions and fitting of the unit. Lommy Pro T overview 1. Hole for mounting 2.
- Page 2 In order to turn the unit on, briefly press the on/off button. To turn off the unit, press the on/off button for 5 seconds until the yellow LED starts blinking fast. Release the button for less than 2 seconds before pressing it briefly again, after which the Lommy Pro T will switch off. Installation A 1A fuse should be fitted...
- Page 3 Setting up and monitoring your Lommy Pro T via your computer or portable unit If you have a subscription with Flextrack, then you can log in at www.flextrack.dk to set up and change the configuration and alarm destinations. Your username and password are the 10-digit serial number found on the back of your Lommy Pro T.