Download Print this page

Advertisement

Quick Links

"
"
PAVANE
NOS Differential DAC
User manual
Updated 01-01-2018
All-Engineering BV
https://metrumacoustics.com
info@metrumacoustics.com

Advertisement

loading
Need help?

Need help?

Do you have a question about the PAVANE and is the answer not in the manual?

Questions and answers

Bill Robe
July 18, 2025

Where is repair service available in Southern California?

Summary of Contents for Metrum Acoustics PAVANE

  • Page 1 " " PAVANE NOS Differential DAC User manual Updated 01-01-2018 All-Engineering BV https://metrumacoustics.com info@metrumacoustics.com...
  • Page 2 In short, the PAVANE is a DAC that has taken all the lessons and experiences that her designer has learned over the years, and combined them in an ambitious DAC that can fit in every system.
  • Page 3 DACs and that something, according to many ears, is musical enjoyment. Pure and simple. The PAVANE is available in black or silver. The used top panel is a sandwich of steel and 4 millimetres of tempered black coated glass and gives the PAVANE very distinctive looks.
  • Page 4: Important Safety Instructions

    10. The PAVANE DAC must be placed on a firm, level surface where it is not exposed to dripping or splashing.
  • Page 5 What is in the Box • The PAVANE DAC • Power cord (only Euro or USA based power cords) • USB cable • USB stick with user manual and USB drivers • BNC to RCA adapter All-Engineering BV https://metrumacoustics.com info@metrumacoustics.com...
  • Page 6: Inputs & Connections

    RCA outputs: Standard interlinks can be used to connect the DAC to your amplifier. The "PAVANE" is designed conform the "Red book standard" so the maximum output will be 2 Volts RMS or 5.7 Volts peak to peak. Your (pre)amplifier should handle this output level.
  • Page 7: Operation

    XLR output will be 4 Volts RMS or 11.4 Volts peak to peak. Your (pre)amplifier should handle this output level. • Mains supply: First check the marks on the backside of the "PAVANE" to be sure it matches the power requirements for the specific country. •...
  • Page 8 Remote control The remote control is made to control the available digital inputs. As opposed to the front panel buttons where you can select one of the digital sources directly, the remote will toggle through the entire range of available digital sources. When the ONYX is set into the stand-by mode, it will remember the last input selection and is available again when the ONYX is switched on.
  • Page 9 By gently turning the housing upside down the printed circuit board will fall out and the component side will be visible now. As shown above push the battery out of its holder by using the back side of a swab. Take the new battery and push it in the battery holder with the “+”...
  • Page 10 44.1- 384 kHz sampling , 16 or 24 bits Dimensions H x W X D: 85 x 440 x 320 mm. Weight: 10kg. Subject to change without notice. Metrum Acoustics Ambachtsweg 4K 3953BZ Maarsbergen The Netherlands All-Engineering BV https://metrumacoustics.com info@metrumacoustics.com...

This manual is also suitable for:

1467a