1 – AMERICA2 PSD with Power Supply, USB cable, USB dongle and the PSD Info sheet. (These items are ship separately from the DIB system) Data-Pac Mailing Systems Corp. Copyright Data-Pac Mailing Systems Corporation 2019. All Rights Reserved. DIB-C Setup and Basic Operation Guide Ver. 2.0...
Page 3
DIB Cabling Diagram Data-Pac Mailing Systems Corp. Copyright Data-Pac Mailing Systems Corporation 2019. All Rights Reserved. DIB-C Setup and Basic Operation Guide Ver. 2.0...
1. An AC Power Strip is recommended for the AC Power connections. 2. Plug the DIB-C Power Cord into the AC Power Strip. (Make sure the DIB switch located in the front of the unit is in the OFF position.) 3.
3. To enter the PSD Parameters, in the Main screen click the Options button. Click the Options Button Data-Pac Mailing Systems Corp. Copyright Data-Pac Mailing Systems Corporation 2019. All Rights Reserved. DIB-C Setup and Basic Operation Guide Ver. 2.0...
Page 6
DIB. The DMS Account Number, DMS Serial Number, and the Origin Zip can be found on the PSD Info sheet. Click OK when complete. Data-Pac Mailing Systems Corp. Copyright Data-Pac Mailing Systems Corporation 2019. All Rights Reserved. DIB-C Setup and Basic Operation Guide Ver. 2.0...
Page 7
6. To set the Print Mode, in the Main screen click the Options button. Click the Options Button 7. In the Options screen click the General button. Click the General Button Data-Pac Mailing Systems Corp. Copyright Data-Pac Mailing Systems Corporation 2019. All Rights Reserved. DIB-C Setup and Basic Operation Guide Ver. 2.0...
Page 8
9. To install the ink cartridge, in the Main screen click the Meter button. Click the Meter Button Data-Pac Mailing Systems Corp. Copyright Data-Pac Mailing Systems Corporation 2019. All Rights Reserved. DIB-C Setup and Basic Operation Guide Ver. 2.0...
Page 9
Menu Button 11. In the DMS Menu screen click the New Ink button. Click the New Ink Button Data-Pac Mailing Systems Corp. Copyright Data-Pac Mailing Systems Corporation 2019. All Rights Reserved. DIB-C Setup and Basic Operation Guide Ver. 2.0...
Page 10
Pen Stall on the right side and lift the lever on the top. Place the Print Cartridge in the Pen Stall and push the lever to lock it in. Close the front cover on the DIB-C and click the Close button to close the New Ink screen. After the close button is clicked a window will appear asking if you actually installed a new Print Cartridge.
Page 11
15. When the Static button is clicked the Postage Rate is set and the Belts start on the DIB-C. Manually feed a mail piece into the left side of the DIB-C. The mail piece will pass through the DIC-C from left to right and print the Postage Rate selected prior. Click Stop when finished running mail pieces.
Need help?
Do you have a question about the DIB-C and is the answer not in the manual?
Questions and answers