Related Manuals for QUANT QUANT-11
Summary of Contents for QUANT QUANT-11
- Page 1 OUR MERIT - SAFE VOLTAGE Automatic voltage regulator, one-phase QUANT-11 Operation manual Made in Ukraine ТУ У 27.1-22049061-001:2021...
- Page 2 At the same time the dimensions and weight of the product were reduced. It will be even easier for the user to place QUANT at home, and that’s a good thing. Because now it will be possible to reliably fix the regulator even on a plasterboard wall (the improved suspension also contributes).
- Page 3 OPERATION MANUAL QUANT-11 Automatic voltage regulator, one-phase Find out all about QUANT stabilizers on the channel https://www.youtube.com/channel/UCWVXbv4Spwr5yUb-U9fvMWw...
-
Page 4: Table Of Contents
6. Installation and connection ......................13 7. Regulator operation ........................16 8. Regulator operation ........................17 ......................17 8.1. Information about the device ..............17 8.2. First level menu screens and second level menu screens .....................23 8.3. Regulator bypass mode operation Quant regulator built-in protections ................23... - Page 5 QUANT-11 Automatic voltage regulator, one-phase...
-
Page 6: Safety Precautions
The one-phase Quant voltage regulator goes on sale in a state for the regulator power according to the wiring material spec- that complies with safety regulations. -
Page 7: Intended Purpose
220/230V from a grid with poor quality. The difference between QUANT regulators is the supply of uni- The regulator in pack can be transported by any type form, without pulse emissions or failures, voltage to the load. -
Page 8: Technical Specifications
Operating frequency range, Hz 45-50 Warranty, months Operating temperature range, °С +5 …+40 Additional warranty, months Humidity range, % 0…80 Country of origin Ukraine, Zhytomyr Delay before switching on, sec. Country of brand registration Ukraine Mounting method Hinged Goods manufacturer LLC RPF QUANT-INGINEERING... -
Page 9: Extended Specification And Technical Specifications
The use of the generator and regulator together is allowed only with the use of the generator integration unit. This is described in more detail on the website in the article “Quant and reserve power supply. Generator integration unit”. *4. The Quant voltage regulator limits the input and output current taking into account double overload. -
Page 10: Scope Of Delivery
QUANT-11 Automatic voltage regulator, one-phase 4. Scope of delivery 5. Device and principle of operation The delivery scope includes: The regulator uses the principle of double voltage conversion • voltage regulator – 1 pcs. with the ability to return it to the grid, for example, when operat- ing with solar power plants. - Page 11 QUANT regulators guarantee power output not less, than the grid itself can deliver at a given input voltage (P=I*U). The regulator consists of two main separated functional parts, combined in one housing, and always operating together: •...
- Page 12 QUANT-11 Automatic voltage regulator, one-phase REGULATOR CIRCUIT...
-
Page 13: Installation And Connection
QUANT-11 Automatic voltage regulator, one-phase connection and installation of the regulator. Conduct checks 6. Installation and connection only with specialized devices, such as a multimeter in the "phase search" mode or an indicator screwdriver. If you purchase a regulator from authorized dealers, you will be offered a paid or free (bonus) installation and connection of a Do not check for a phase with hands. - Page 14 QUANT-11 Automatic voltage regulator, one-phase 7. Remove the screws/bolts from the terminal block, fasten ON/OFF switch levers on the regulators front panel to the upper position. the wires according to the markings, screw in and tighten the bolts, check that they are securely tightened. Do not use a powerful (socket) wrench, because it can strip the thread in the terminal block.
- Page 15 QUANT-11 Automatic voltage regulator, one-phase VOLTAGE REGULATOR INSTALLATION CHART Electricity meter 220V socket Stabilizer Automaton...
-
Page 16: Regulator Operation
(especially with a weak and long power line). over 350V and the main circuit breaker is switched off; If such a welding machine is connected to a QUANT regulator, the load • protection against short-circuits and continuous output overloads;... -
Page 17: Regulator Operation
Volts and tenths of QUANT II or "Big Model" - 11 kW, 14 kW. Dimensions: 470 mm х a Volt. 330 mm х 130 mm. - Page 18 QUANT-11 Automatic voltage regulator, one-phase Graphic load percentage indicator shows the fraction of the maxi- exit these menu items to the default screens either turn off the mum possible power at the current input voltage. power or long press the left button again.
- Page 19 QUANT-11 Automatic voltage regulator, one-phase • SCREEN NO.4 To exit the menu, press the middle button again. You can safely move further on the menu - the device will return the cooling sys- Fix Voltage Min tem to normal mode. The value is not saved.
- Page 20 QUANT-11 Automatic voltage regulator, one-phase The maximum output current at voltages above 220V is dis- • SCREEN NO.12. TURN-ON DELAY. played here. Note that the input current and the output current Timer Power ON values may not match at low voltage. In this case, the amount of second current at the output will be lower than at the input.
- Page 21 It is not recommended to change OUT CONSULTATION. this parameter without consulting a specialist! Remember - the Quant voltage regulator provides a sta- bilized 220V power supply within the range from 90V to 350V, this is its normal 24/7 mode...
- Page 22 • The protection does not contain wearing parts, unlike tradi- QUANT regulator, because it is connected directly to the tional FPS, and can be used in production environments with grid, which can be dangerous for the equipment in the one power line as the powerful machines, giving large over- event of power surges.
-
Page 23: Regulator Bypass Mode Operation
The regulator will protect the load even in the event of regular phase-to-zero short circuits or poor contact in the neutral wire. (if QUANT regulators are very reliable, therefore malfunction of at the same time the voltage is above 350V it will switch it off), the regulator itself is rarely the reason of such shutdowns. - Page 24 Automatic voltage regulator, one-phase OUR MERIT - SAFE VOLTAGE quant.ua January 2022...