American Dream Products E-Z Stitch Assembly Instructions Manual

Floor stand

Hide thumbs

Table Of Contents

Table of Contents

Quick Links

Download this manual

Tool Needed:

Parts:

(A) 2 Legs

(B) 2 Feet

(D) 4 Cross Braces

(E1) 1 Right Arm

(E2) 1 Left Arm

(F) 2 Elbows

(G) 2 Side Bars, 10 inch

(H) 8 2½" Threaded Bolts

(I) 2 3" Threaded Bolts

(J) 2 3½" Threaded Bolts

(K) 4 1½" Phillips Head Bolts

(L) 2 2" Phillips Head Bolts

(M) 32 Knobs

(N) 2 30" Scroll Rods

(O) 1 3 yd E-Z StitchTape for Fabric

Attaching Feet and Ankles to Legs

Step 1 - Identify and Place Feet

Both Feet (B) are identical with each having a longer and shorter end (as

measured from nearest brass inset. On a flat surface, place each foot so that

they are mirrored with shorter ends closest together.

rear

Longer

Floor Stand

Assembly Instructions

front

Shorter

front

Shorter

rear

Longer

Page 1

Table of Contents

Need help?

Do you have a question about the E-Z Stitch and is the answer not in the manual?

Questions and answers

Summary of Contents for American Dream Products E-Z Stitch

Page 1 Floor Stand Assembly Instructions Tool Needed: Parts: (A) 2 Legs (B) 2 Feet (C) 2 Ankles (D) 4 Cross Braces (E1) 1 Right Arm (E2) 1 Left Arm (F) 2 Elbows (G) 2 Side Bars, 10 inch (H) 8 2½” Threaded Bolts (I) 2 3”...
Page 2 Step 2 - Identify and Place each Leg and Ankle Both Legs (A) and Ankles (C) are identical. Identify the outside of each Leg (A) indicated by the single hole left of center. Place the end-hole of Leg (A) over the center brass inset of each Foot (B).
Page 3 Knob Tip: From this point forward you will be Attaching Cross Supports using a screw and 2 knobs to attach Step 5 - each piece Determine Length of Cross Supports together. Make The length of the Cross Supports will be 6 sure you turn the knobs together inches greater than the the Scroll Rod (N)
Page 4 Attachment Bolt Step 7 - Connect Cross Supports to Legs (continued) Holes The floor stand will now stand on its own. Attaching Arms Step 8 - Attach Arms The arm is placed on the inside of the legs (with the grove and holes facing upward) using Threaded Bolt (H), secured with 2 knobs (M).
Page 5 Step 8 - Attach Elbows to Legs The elbows are placed on the outside of the legs using Threaded Bolt (H) and secured with 2 knobs. Step 9 - Attach Elbows to Arms Next attach Elbow (F) to Arm (E1 & E2) using Threaded Bolt (I) and two knobs.
Page 6 Your E-Z Stich Floor Stand is now ready to use If you have any questions regarding your E-Z Stitch frames, please e-mail us at info@embroidery.com or call us at (435) 755-0486. Page 6 Manufactured by Embroidery Central, dba. American Dream Products, 1638 N 200 W, Logan, UT 84341...
Page 7 Configurations REAR FRONT Foot Each Foot (B) has three attachment locations Choose the Standard Position unless you need additional clearance around furniture or other obsticals. Standard Switched REAR FRONT REAR FRONT Back Forward REAR FRONT REAR FRONT The arms and elbows have adjustable locations for placement, depending on how far forward you would like your scroll frame to come toward you while stitching.