Advertisement
Quick Links
MONTAGEANLEITUNG
BPS PFOSTENTYP C
ASSEMBLY INSTRUCTIONS
Camas gabion post type 4
1. Benötigtes Werkzeug
• Ready mixed concrete / screed mortar
• Water
• Folding ruler
• Spirit level
• 5.5 mm hexagon
• Water pump pliers
• Spade
• Angle grinder & safety glasses
3. Set posts
2480mm
Dimension between the
Posts = clear width
5. Setting with slope
With a gradient of
more than 10% it is
recommended to
divide the grids*.
*Additional posts are
required here!
2. Foundations
We recommend a hole size
of (W/D/H) 30 cm x 30 cm
x 60 cm. Concrete requires
approx. 55 - 60 L or
2x 40 kg bag per hole.
1/2
Watering
4. Fence mounting
both sides
Both sides
attach
6. Installing the spacers
ATTENTION: Please distribute evenly.
After the concrete
foundations have
set, the mesh and
spacers can be
mounted. Please
place the M8 fence
construction screw
straight and turn it
hand-tight.
Please refer to the table
on the following page for
the required number of
spacers.
Advertisement
Summary of Contents for Camas gabion post type 4
- Page 1 MONTAGEANLEITUNG BPS PFOSTENTYP C 2. Foundations ASSEMBLY INSTRUCTIONS Camas gabion post type 4 We recommend a hole size of (W/D/H) 30 cm x 30 cm x 60 cm. Concrete requires 1. Benötigtes Werkzeug approx. 55 - 60 L or 2x 40 kg bag per hole.
- Page 2 8. Fill 9. Layer by layer straighten the stones by hand Edge protection 10. Corner Quantity required: Camas gabion On the inside of the double rod mat post type 4 you should cut out about 3 cm. Gabion height Spacer 630-830 mm ®...