Download Print this page
AirCube AC-24HYDROKIT Instruction Manual

AirCube AC-24HYDROKIT Instruction Manual

Active oxigen grow system

Advertisement

Quick Links

ACTIVE OXIGEN GROW SYSTEM
DISTRIBUTED BY
GROWACE.COM
I structio
M u l
ACTIVE OXIGEN GROW SYSTEM

Advertisement

loading
Need help?

Need help?

Do you have a question about the AC-24HYDROKIT and is the answer not in the manual?

Questions and answers

Summary of Contents for AirCube AC-24HYDROKIT

  • Page 1 I structio M u l ACTIVE OXIGEN GROW SYSTEM DISTRIBUTED BY GROWACE.COM ACTIVE OXIGEN GROW SYSTEM...
  • Page 2 Congratulations on the purchase of the AirCube Active Oxygen Grow System. The AirCube system is the one and only Ebb & Flow grow system on the market that combines the benefits of air pruning with a fully automated Ebb+Flow system!
  • Page 3 2 x ¾ Elbow Connectors AirCube Active Oxygen 6 x Air Pruning Fabric Pots 6 Bucket System 1 x AirCube Poptank Collapsible 6 x 5-Gallon Active Oxygen Grow Buckets Reservoir 25 Gallon (Optional: 60 Gallon and 105 Gallon Reservoir Upgrade) 6 x ¾...
  • Page 4 SYSTEM EXPANDABILITY OPTIONS: SYSTEM EXPANDABILITY OPTIONS: 6-Bucket System 24-Bucket System 25 Gallon Reservoir 105 Gallon Reservoir 12-Bucket System 36-Bucket System 60 Gallon Reservoir 105 Gallon Reservoir...
  • Page 5 SETTING UP THE GROW SYSTEM Step 1: Set up Reservoir Step 2: Set up Brain Controller Place the Brain Controller in front of the reservoir with There are 2 upper water level float valves that are on a timer facing away from the reservoir. an adjustable mount so the Brain Controller can be used with different size pots.
  • Page 6 Step 3: Set up Buckets Place one water pump, “ Drain Pump,” on the inside bottom of the Brain Controller. Insert grommets into the bottom of each bucket. Measure, cut, and connect tubing to attach the Drain- Pump to the straight connector under the Brain Controller lid.
  • Page 7 The following are suggested watering times and meant to be used as a Step 4. Configure Timer on Brain Controller starting point. It is recommended that you monitor your plants to deter- mine the optimum watering times for your grow. There are 2 settings on the Brain Controller Timer- Automatic Watering and Manual Watetring.
  • Page 8 Additional Information 1. DO NOT remove fabric pots during the “Fill” cycle, as flooding will occur. Question: Should I check and adjust the pH level? Answer: Check the pH level every day. The pH should stay close to 6.3. 2. DO NOT fill fabric pots with grow medium or add plants while the fabric pot is inside the grow bucket.

This manual is also suitable for:

Ac-6hydrokit-25gAc-12hydrokit-60g