Summary of Contents for FOCUSED FTS20204
- Page 1 FTS20204 Battery-Operated Lag Driver Operation Manual www.FocusedTS.com 973-705-7170 customerservice@focusedts.com...
- Page 2 Warranty form or have your Warranty assigned number ready. (NOTE: The warranty recording form must be submitted to validate the warranty). SERVICING: This manual contains safety, operation, and routine maintenance instructions. Focused recommends that servicing of battery powered tools, other than routine maintenance, must be performed by an authorized and certified dealer.
-
Page 3: Safety Symbols
FTS20204 - Battery Operated Lag Driver SAFETY SYMBOLS Safety symbols and signal words, as shown below, are used to emphasize all operator, maintenance and repair actions which, if not strictly followed, could result in a life-threatening situation, bodily injury or damage to equipment. -
Page 4: Safety Precautions
FTS20204 - Battery Operated Lag Driver SAFETY PRECAUTIONS Tool operators and maintenance personnel must always comply with the safety precautions given in this manual and on the stickers and tags attached to the tool. These safety precautions are given for your safety. Review them carefully before operating the tool and before performing general maintenance or repairs. -
Page 5: Pre-Operation Safety Inspection
FTS20204 - Battery Operated Lag Driver TOOLS STICKERS & TAGS Focused Technology LagEase - Logo Decal –All-In-One Product Label-FTS20204-CPD01 Focused Technology LagEase - Tool Logo Decal-FTS20204-CPD02 Focused Technology LagEase - Focused Technology Contact Information Decal-FTS20204-CPD03 Focused Technology LagEase- Focused Technology Solutions U.S.A. Decal- FTS20204-CPD04 NOTE: THE INFORMATION LISTED ON THE STICKERS SHOWN, MUST BE LEGIBLE AT ALL TIMES. -
Page 6: Operating Procedures
FTS20204 - Battery Operated Lag Driver OPERATING PROCEDURES 1. Observe all safety precautions (see page 3). 2. Ensure the battery is installed. 3. To drive a screw spike/lag, make sure the tool is operating in a clockwise direction. Press the direction button forward away from the user and toward the ground. -
Page 7: Specifications
FTS20204 - Battery Operated Lag Driver ● Always store the tool in a clean, dry space, safe from damage or pilferage. Also, ensure the battery is disengaged and not on the tool. ● Do not exceed the rated limits or use of the tool for applications beyond its designed capacity. (see manual) ●... - Page 8 Said warranty to include the repair or replacement of defective parts or equipment only. Legislation requires that all protective equipment be tested at least once a year for compliance with Focused Technology Solutions specifications and to industry standards. Ensuring your safety equipment meets or exceeds the highest standards reduces the costs of lost-time accidents.
- Page 9 FTS20204 - Battery Operated Lag Driver THE CUSTOMER ASSUMES THE RISK OF DAMAGE OR LOSS DURING SHIPPING AND IS RESPONSIBLE FOR THE SHIPPING COSTS INCURRED. Drill Warranty: See drill manufacturer’s standard warranty. FTS20204 Operation Manual 1-13-21 973.705.7170 www.FocusedTS.com customerservice@focusedts.com...