Subscribe to Our Youtube Channel
Related Manuals for ROCWARE A20C
Summary of Contents for ROCWARE A20C
- Page 1 A20C USB Video Conference Camera User Manual Video Conference Solution ROCWARE Corporation...
- Page 2 English (V1.0) Copyright Notice All contents of this manual, whose copyright belongs to ROCWARE Corporation cannot be cloned, copied or translated without the permission of the company. Product specifications and information which were referred to in this document are for reference only. We may change, delete, or update any content at any time and without prior notice.
-
Page 3: Table Of Contents
A20C USB Video Conference Camera User Manual Catalogue Note ........................1 Packing List ......................1 Quick Start ......................1 About Product ......................2 Features ..........................2 Product Specification ......................2 Interfaces and Buttons ......................3 Remote Control ........................4 RS-232 Interface ........................5 Serial Communication Control .................... -
Page 4: Note
A20C USB Video Conference Camera User Manual environment to avoid any cover (plastic Note material) damage. Make sure there is no obstacle within rotation range. ⚫ Electric Safety Please never power on before installation is Installation and operation must accord with completed. -
Page 5: About Product
A20C USB Video Conference Camera User Manual ⚫ Remote Control 2) Connect the power adapter to the power connector on the rear panel of the camera. The camera can be remotely controlled via an The power indicator on the front panel of RS232 cable. -
Page 6: Interfaces And Buttons
A20C USB Video Conference Camera User Manual USB Feature Operating Windows XP/Vista/7/8/10, System Mac OS X, Linux Color space/ YUV2/H.264/MJPEG Compression USB2.0: 1080p/30, 1080p/25, 1080p/15, 1080p/10, 720p/30, Video Format 720p/25, 960x540p/30, 960x540p/25, 640x360p/60, 640x360p/50 USB Video Communication UVC 1.0 Protocol... -
Page 7: Remote Control
5. HOME Key 4.4 Remote Control Confirm menu, enter the submenu or the PTZ will back to the middle position after pressed it 6. Return Key Return back the last level menu 7. Zoom Key Slow Zoom: Zoom In [+] or Zoom Out [-] slowly Fast Zoom: Zoom In [+] or Zoom Out [-] fast 8. -
Page 8: Rs-232 Interface
16. Backlight Key Function BLC ON/OFF: Press this button to enable the backlight compensation. Press it again to disable the backlight compensation. NOTE: ⚫ Effective only in auto exposure mode. ⚫ If a light behind the subject, the subject will become dark. In this case, press the backlight ON/OFF button. -
Page 9: Gui Settings
VISCA/Pelco-D/Pelco-P standard protocol. If 5.2 EXPOSURE secondary development required, Move the main menu cursor to [EXPOSURE], camera can be controlled according to the and press [HOME] key enter the exposure standard protocol. page, as shown in the following figure. For a detailed list of VISCA/Pelco-D/Pelco-P EXPOSURE protocols, contact the manufacturer. -
Page 10: Color
Shutt: Shutter value, optional items: 1/30, 1/60, 5.4 IMAGE 1/90, 1/100, 1/125, 1/180, 1/250, 1/350, 1/500, Move the main menu cursor to [IMAGE], and 1/725, 1/1000, 1/1500, 1/2000, 1/3000, 1/4000, press [HOME] key enter the image page, as 1/6000, 1/10000 (Effective only in Manual, shown in the following figure. -
Page 11: Noise Reduction
P/T/Z SpeedByZoom 5.7 SETUP AF-Zone Center AF-Sense High Move the main menu cursor to [SETUP], and Display Info press [HOME] key enter the setup page, as Image Freeze Digital Zoom shown in the following figure. Call Preset Speed SETUP Pre Zoom Speed Language Voice Track USB Mode... -
Page 12: Restore Default
(Effective only in PELCO-D protocol). diluted neuter detergent. Do not use any P_P_Address: Optional items: 0 ~ 31. type of solvents, which may damages the (Effective only in PELCO-P protocol). surface. V_AddrFix: If you can change through the Unqualified Application serial port of infrared switch, optional items: On, ⚫... - Page 13 ⚫ Sometimes without the image Control ⚫ Remote control can not control Check the cable of video platform and TV whether correct connection. 1) Check and replace the new battery for the ⚫ Image have jitter when the camera lens at remote controller.
Need help?
Do you have a question about the A20C and is the answer not in the manual?
Questions and answers
my camera standby remont not working
The manual does not directly address issues with the standby function of the remote. However, if the ROCWARE A20C camera's standby function is not working via remote, check if the camera is properly installed and stable. Ensure there are no vibrating objects nearby. Also, verify that the control protocol, address, and connections are correct. If the issue persists, try using the standby button on the camera itself.
This answer is automatically generated