Advertisement
Instruction manual for civil technicians
Product contents:
Attention:
All the parts have been checked in advance and have been packed in
the box in the order in which they are to be assembled.
Port seals A + B
Required tools:
Measuring tape
Permanent marker
Soft brush
Instruction manual Civil V1.0 _ XX-09-2020 _ FttX-Distribution Closure AT29030 _ Page 1 of 6
FttX-Distribution Closure
A
B
Velcro strips (6x)
Advertisement
Table of Contents
Summary of Contents for ATTEMA FTTX
- Page 1 Port seals A + B Velcro strips (6x) Required tools: Measuring tape Permanent marker Soft brush Instruction manual Civil V1.0 _ XX-09-2020 _ FttX-Distribution Closure AT29030 _ Page 1 of 6...
- Page 2 Keep the foam seals (B) separate for now. They are to be used in step 11. Fold the foam port seal A, including the core, around the bundle of cables/ducts. Instruction manual Civil V1.0 _ XX-09-2020 _ FttX-Distribution Closure AT29030 _ Page 2 of 6...
- Page 3 11. Place the foam strips (B) over the base plate's hooks. Pay attention! All 4 ports must now be sealed with the foam seals A + B. Instruction manual Civil V1.0 _ XX-09-2020 _ FttX-Distribution Closure AT29030 _ Page 3 of 6...
- Page 4 15. Remove the lid from the packaging. Check the foam strip for damage. Brush the top edge of the housing to remove any soil. Place the lid on the housing. Instruction manual Civil V1.0 _ XX-09-2020 _ FttX-Distribution Closure AT29030 _ Page 4 of 6...
- Page 5 2. Remove the lid. 3. Extend the DB ducts until it is above ground level and blow in the mini cable. Instruction manual Civil V1.0 _ XX-09-2020 _ FttX-Distribution Closure AT29030 _ Page 5 of 6...
- Page 6 Brush the top edge of the housing to remove any soil. Place the lid on the housing. 6. Slide the attachment clips over the edge of the lid. Instruction manual Civil V1.0 _ XX-09-2020 _ FttX-Distribution Closure AT29030 _ Page 6 of 6...
Need help?
Do you have a question about the FTTX and is the answer not in the manual?
Questions and answers