Advertisement
Quick Links
Commissioning
6.
Gently push the product into the wall, taking care not to trap any wiring.
7.
Replace fuse or circuit breaker and switch on. Your light is now ready for use.
Fitting / Replacing Bulbs
This system contains non-replaceable parts and cannot be serviced. If damage occurs the part
should be scrapped.
Care and Cleaning
We recommend cleaning with a soft cloth.
Do not use solvents or abrasive cleaners as these could damage the finish.
Recycling Advice
Waste electrical products should not be disposed of with household waste.
Please recycle where facilities exist. Check with your Local Authority or retailer
for recycling advice.
Safety In formation
For your safety, always switch off the supply before cleaning.
This system contains non-replaceable parts and cannot be serviced. If damage occurs the part
should be scrapped.
The shade must be replaced immediately should the shade become
place.
Masterlite BH17 7BY
Dakota Brick Light
26/05/17
81265
Advertisement
Summary of Contents for Masterlite 81265
- Page 1 For your safety, always switch off the supply before cleaning. This system contains non-replaceable parts and cannot be serviced. If damage occurs the part should be scrapped. The shade must be replaced immediately should the shade become place. Dakota Brick Light 81265 Masterlite BH17 7BY 26/05/17...
- Page 2 Thank you for purchasing this light fitting. Cut the mounting hole for the unit taking care not to damage any pipes or mains cables Please read the instructions carefully before use to ensure safe and satisfactory operation of beneath the mounting surface. this product.