Page 5
Download APP and Register a user account and login Search and download “YCC365 Plus” in Apple Store or Android app store. Or scan below QR code to download and install it to your phone. Click “Sign up” to register your email as user ID and create a password according to the procedure.
Page 6
(Note: Because camera need to run for video stream. It requires SD card with high-speed reading and writing. So please use C10 (Class10) or higher speed SD card. U3 type will be preferable.) E27SX1 E27S E27XS2 Connect camera to power socket and turn on power. Wait about 30 seconds, camera will rotate left-right and up-down.
Page 7
On the app, press “+”, Select “intelligent Camera”, select “Scan code to add” Press “Next”. On the Step 1), you already connected your phone to your Wi-Fi. So, it automatically shows your Wi-Fi name. You just type in your Wi-Fi password, then press “Next”.
Page 8
Wi-Fi connecting” and voice “please wait for internet connecting”. Now press “When you hear a beep or a green light” button on app. Then just wait. Camera is added successfully to you APP account. Now you can use it. www.camnsmart.com...
Page 10
SD card to camera, and then supply power again to camera. After camera connects internet again, please get to settings to set recording mode to “Alarm recording” or “Continuous recording”. www.camnsmart.com This Quick Guide may be revised without further notice. Copy writes by CamnSmart.