READ AND SAVE THESE INSTRUCTIONS Thank you for choosing this AIRGREAN dehumidifier. We at AIRGREAN ENTERPRISE truly appreciate your business. This manual is intended to be a source of information on how to operate, maintain and troubleshoot your new dehumidifier. Please take the time to read through this manual thoroughly.
DO NOT • Do not put into water or operate near water source. • Do not stop operation of the dehumidifier by pulling out the power cord. • Do not place the unit near the heat equipment or inflamma- ble dangerous goods. •...
DEHUMIDIFIER IDENTIFICATION FEATURES Handle Filter Control Panel Air Outlet Power Cord Handle Wheel Water Pump Drain Hose OPERATION INSTRUCTION Dehumidify Tank Full Defrost Humidity % Total Running Time ON/OFF Humidity Control +/- DRAIN INSTRUCTIONS OF BUTTONS: 1. ON/OFF: Each press ON/OFF, unit runs in a circulate “on-off-on”...
INSTRUCTION OF FUNCTION MODE: Unit makes a “BEEP” sound when powered on. Then when switch button is in humidity mode, the indicator light of the Dehumidifier will light up. The default setting for humidity is 60%, the machine’s dehumidifying range is 30%-90%. Use the Humidity Up and Down buttons to adjust the humidity setting.
OPERATION NOTICES 1. There is a 3 minute delay after machine has shut down prior to next start up cycle. 2. When moving the machine, do not tip the machine for over 45 degrees angle to avoid damaging the compressor. 3.
If there is any failure, there will be a failure code displayed on the humidity display window. Failure Display Problem Humidity sensor failure Water full Defrost sensor failure TECHNOLOGY SPECIFICATION Model AG-D210 Power supply 115V/60Hz Dehumidification capacity 210 Pint per day Rated input power 1030W Nominal current 9.3A Weight 110.2 lbs...
Page 8
AIR GREAN ENTERPRISE, INC. OF CALIFORNIA Website: www.airgrean.com...
Need help?
Do you have a question about the AG-D210 and is the answer not in the manual?
Questions and answers