Advertisement
Quick Links
Assembly Instructions
Black Stamped Steel 'T' Table Bases
Drill driver or
1. Flip your tube/spider
so the spider is on the
ground and the bottom
of the tube is facing up.
5. Locate the leveling glides and
screw into the welded end tabs
of the 't' foot.
What you will need for assembly:
screwdriver
2. Screw out the short
bolt in the bottom
of the tube/spider.
Crescent wrench
or socket set
6. Your table base
is now ready to
be mounted to
the table.
What's in the box:
(8) 3/4" #10 screws
Tape measure
3. Place the 't' foot on
the tube.
4. Using the socket set
or crescent wrench,
screw in the short
bolt with lock washer
and flat washer into
the tube
7. Place the table
base onto the
bottom side
of the table.
per base
Advertisement
Related Manuals for OAK STREET 0621
Summary of Contents for OAK STREET 0621
- Page 1 Assembly Instructions Black Stamped Steel ‘T’ Table Bases What you will need for assembly: What’s in the box: Drill driver or Crescent wrench (8) 3/4” #10 screws Tape measure screwdriver or socket set per base 1. Flip your tube/spider so the spider is on the ground and the bottom of the tube is facing up.
- Page 2 ‘t’ base on the opposite #10 screws, fasten the end of the table. base to the table top. 12. Assembly is complete. Enjoy your Oak Street Manufacturing black stamped steel table base! P: 877.465.4344 255 Welter Drive F: 877.465.4042 Monticello, IA 52310 www.oakstreetmfg.com...
Need help?
Do you have a question about the 0621 and is the answer not in the manual?
Questions and answers