Cs camera filter system & cs camera photography systems (2 pages)
Summary of Contents for TACSWAN 85-030
Page 1
SHIELD LIGHT CABLE ORGANIZER BOX P/N 85-030 Please read below before using your Shield Light Cable Organizer Box as it relays beneficial operating and safety information. PHYSICAL CHARACTERISTICS Full Assembly: 3.07 x 1.97 x 0.87 (78 x 50 x 22 mm)
INSTALLATION 1. Press both Release Tabs while lifting the Cover from the Base. The internal Cable Retainer Boss of the Cover and Base should now be accessable. PRESS HERE LIFT PRESS HERE 2. Place excess cable through one side of the Cable Slot of the Base. Then, wrap, or loop, the cable around the Cable Retainer Boss until the desired amount of slack has been removed.
3. Use finger to keep the cable held in position around the Cable Retainer Boss. Press the Cover to the Base so that the Release Tabs align with the Release Tab Holes. Make sure that the Tabs are locked in the Holes. SHIELD INSTALLATION 1.
Page 4
SHIELD INSTALLATION REFERENCE 3m Reclosable fastener Base, cable organizer box BALLISTIC 3m Reclosable fastener shield The user, or operator, side of the shield is shown towards the reader of this manual. lid, 3m Reclosable fastener cable organizer box...
When done, pat dry with a refurbished product by someone damp cloth. other than TacSwan) prior to your purchase, you are not the Original WARNINGS Purchaser and the product that you TacSwan, LLC is not responsible for...
Retain your receipt for proof of purchase. All TacSwan products are designed in Oceanside, CA. All TacSwan products are manufactured with the highest quality USA and foreign parts. Products are assembled in either TacSwan’s controlled plant in Asia or...