Page 3
2. Rear pushing rod-left STEP 1 Place (8) into the groove of (7), and then embed (8) into the rear tube cap head. Secondly, cross (5) through (5), and then lock (5) with (9) to the rear tube cap upper part. STEP 2 Firstly, fix (6) with (10) to the upper part of the assembled (10).
Page 4
3. Rear pushing rod-right STEP 1 Place (8) into the groove of (7), and then embed (8) into the rear tube cap head. Secondly, cross (5) through (5), and then lock (5) with (9) to the rear tube cap upper part. STEP 2 Firstly, fix (6) with (10) to the upper part of the assembled (10).
Page 5
4. Clear up and tie the wires STEP 1 Threading the wire of assist kit through net cloth. STEP 2 Disconnect the connector of wire of joystick and the wire of controller wire. STEP 3 Connect the connector of the wire of joystick with the wire of assist kit.
Page 6
STEP 4 Connect the connector of wire of controller with the other wire of the assist kit. STEP 5 Clear up and tie the wires with hook and loop fastener.