Advertisement
Quick Links
Advertisement
Related Manuals for Certify SNAPXT
Summary of Contents for Certify SNAPXT
- Page 1 SNAPXT CONFIGURATION INSTRUCTIONS...
- Page 2 Steps to configure SnapXT device: • Powering on the device: 1. Plug the wiring terminal into the black power adapter. 2. Plug the black power adapter into power outlet and the device will power on. • How to connect device to Wi-Fi/Network: 1.
- Page 3 • Before using the device, it is necessary to Calibrate the temperature on the device. To calibrate, 1. Return to the Home Page by selecting the “O” icon at the bottom center of the screen. 2. Select the up arrow from the bottom middle of the screen. 3.
- Page 4 1. Return to the Home Page (screenshot above) by tapping on the “O” icon at the bottom of the screen. 2. Select the up-arrow button from the middle of the screen. 3. Select the blue “Certify Snap” icon in the first row. 4. This will launch the Certify Snap Application.
- Page 5 Please be sure your face is inside of the spinning blue circle for an accurate reading. Adding the device to the cloud portal: • 1. To add the device to the Certify cloud portal, double tap on the left top corner on the Certify Snap application...
- Page 6 2. Enter the password (the last 6 digits of the serial number) and press enter. 3. This opens up a menu as shown below: 4. Now tap on the first option “Add device to CERTIFY.me Cloud”. 5. This will add the device to the Certify cloud.