Page 2
CONGRATULATIONS CONGRATULATIONS ON YOUR PURCHASE OF THIS FLAVOUR BLASTER PRO 2! FOR THE BEST EXPERIENCE PLEASE CAREFULLY READ AND FOLLOW THIS USER MANUAL. For the latest information and to be part of a great and growing community please visit: Facebook: https:/ /www.facebook.com/FlavourBlaster/...
Page 3
YOUR FLAVOUR BLASTER PRO 2 AND ENJOY THE PRODUCT IN THE MOST SAFE EFFECTIVE WAY. 1. This Flavour Blaster is designed to be used with Flavour Blaster Aroma’s and Bubble X only. It is not designed to be used with any e-liquids or loose tobacco leaf or herbal substances! 2.
Page 4
Flavour Blaster. 11. Your Flavour Blaster is not waterproof, please keep it dry at all times, especially the USB Port. Place the USB Mag Cover in the USB Port when not charging the Flavour Blaster to protect the USB Port from liquid damage.
To charge your Flavour Blaster Battery connect the correctly powered Micro Mag USB Cable to the Micro USB Input Port. The Screen will show the Battery charge %. A full Battery charge will take 8 hours, giving the Flavour Blaster 8 hours of usage time.
Page 6
BUBBLES Create bubbles filled with aromatics, fill cloches with aromatic clouds, make your own aromatic clouds for cocktail & drinks, add theatrical clouds for desserts, and much more. 1. Bubble mixture should be shaken 2. Bubbles can be created on both wet and 3.
QUICK START 1. CHARGE BLASTER 2. PRIME COIL & FILL TANK 3. INSERT TANK Insert Micro Mag USB Cable Pour Aroma into Tank Insert Tank & add Nozzle 4. TURN ON 5. DIP NOZZLE TIP 6. HOLD TRIGGER Press Trigger 3 times Into Bubble X Jigger Creates Aroma Filled Bubbles QUICK START...
Page 9
FILL TANK 1. OPEN TANK 2. PRIME COIL WITH AROMA 3. FILL TANK Empty Tank then Pour small amount directly onto Pour Aroma into Outer Chamber carefully unscrew Top & Cover Coil Cotton to prevent leaking not into centre Airflow Hole 4.
Page 10
LIQUIDS 1. NOT FULLY WATERPROOF 2. ONLY DIP NOZZLE END 3. DON’T TIP BACKWARDS Handle with care around liquids Don’t dip whole Nozzle into Bubble X To prevent Bubble X leaking into Blaster 4. NO BUBBLE X IN TANK 5. CLEAN / DRY NOZZLE 6.
Page 11
CLEAN TANK 1. UNSCREW TANK LID 2. UNSCREW COVER LID 3. PULL OFF GLASS COVER 4. UNSCREW COIL 5. PULL OFF COIL BASE 6. CLEANING Clean all parts with an alcohol wipe Except for the Coil CLEAN TANK...
Page 12
COIL CHANGE 1. UNSCREW COIL 2. REPLACE COIL 3. PRIME COIL WITH AROMA Unscrew (empty) Tank pieces apart Screw in tight new Coil & ensure Pour small amount directly onto Coil & unscrew Coil black O Rings are in place Cotton to prevent leaking 4.
Page 13
SCREEN 1. 100% BATTERY 2. 80% BATTERY 3. 60% BATTERY Bars indicate battery charge 4. 40% BATTERY 5. LOW BATTERY 6. NO BATTERY Red light indicates 20% battery life Red light flashes when less than 10% SCREEN...
Page 14
RGB WARNING 1. WHITE LED FLASHES 2. RED LED FLASHES 3. GREEN LED FLASHES Temperature too high Tank not detected Coil needs replacing Excess use heat protection Battery wattage low Tank detected Power On/Off RGB COLOUR CHANGE Press and hold RGB button for 3 seconds to turn on 4 colours RGB starts auto colour cycle mode Each color switching time is 3 seconds Press for 3 seconds to exit cycle mode...
Page 15
Always power off the Flavour Blaster when it is not being used and remove the Tank. 8 SECOND CUT OFF: If Trigger is pressed for 8 seconds Flavour Blaster will stop firing until Trigger is released and pressed again. TANK: Do not pour alcohol into tank, this can cause fire.
Please consult www.jetchill.com for full terms and conditions. For warranty assement the Flavour Blaster needs to be returned to the factory (empty Tank before shipping): JetChill Ltd, Unit 1A, Thornton Road Industrial Estate, Pickering, YO18 7JB, UK, info@jetchill.com, 0044 208 1243014...