Advertisement
Quick Links
Two person assembly
3 x 4 m Aluminium
Pergola with Grey Canopy
PLEASE READ AND KEEP THESE INSTRUCTIONS FOR FUTURE USE
SAP Code: JT06520206
For further assistance, other products and more, join us at:
Website: www.alfresia.co.uk
Instagram: @alfresiauk
Facebook: www.facebook.com/alfresia
Thank you for choosing our Alfresia Aluminium 3 x 4m Pergola with Grey
Canopy. Please read this user manual carefully and keep it for future
reference. If you need any assistance, please contact our customer service
team on the details provided on the back page of this manual.
SAFETY INSTRUCTIONS
WARNING:
Keep all flame and heat sources at least 5 meters away from the
fabric. The canopy is not fire proof.
Fires, cooking, smoking, naked flame and storage of cooking
apparatus including barbeques is not permitted inside the
Pergola.
The Pergola Canopy is designed to provide shade only. Do not
use in strong wind and rain. Wind and rain can damage the
Pergola and could result in injury to you and others
Familiarise yourself with the instructions and check all
components for damage before erection and dismantling
Erecting the Pergola will require working from height. Use
appropriate equipment, safe working practices and do not work
from height if you feel unwell.
At least two people are required to erect and dismantle the
Pergola. Erection alone could cause injury to persons or damage
to the Pergola or property
Be careful to avoid pinching your hands or fingers in any of the
parts during construction.
Do not use excessive force while erecting or dismantling the
Pergola as this could cause damage
Always secure the Pergola with the pegs after assembly for
stability
Always use the product for its intended purpose. Misuse of the
product could cause injury
Assembly Notes
Assemble on a soft, clean surface to avoid damaging or marking the
pieces
Do not use if any parts are missing, damaged or worn
Do not use if any of the fixings or fittings are not secure
Always place the product on a flat, level surface before use
2
Advertisement
Related Manuals for alfresia JT06520206
Summary of Contents for alfresia JT06520206
- Page 1 Thank you for choosing our Alfresia Aluminium 3 x 4m Pergola with Grey Canopy. Please read this user manual carefully and keep it for future reference. If you need any assistance, please contact our customer service team on the details provided on the back page of this manual.
-
Page 2: Components Supplied
Components Supplied Assembly Instructions Please check the list of supplied items which correspond to the IMPORTANT: Do not use excessive force at any part of set up. Care must be taken not to overtighten the screws as this will damage the Pergola. numbered diagrams below: Build the four corner posts (1 x A, 2 x B &... - Page 3 Insert the decorative end caps (O) into each of the roof bars, end Turn the previously built side over and attach the end pieces (2 x G) to pieces and side pieces (2 x D&E, 2 x F, 2 x G, 1x H). each of the corner posts.
-
Page 4: Care And Maintenance
Attach the roof bars (2 x F, 1 x H) to the frame using the long screws Adjust the position of the corner posts as necessary to ensure that the (6 x K with supplied washer). The centre roof bar should be positioned frame of the pergola is square and that the canopy slides freely on the so that the pull cord emerges on the opposite side of the frame to the canopy runners. - Page 5 Customer Services: If you would like further advice or information on your product, ensure you have the SAP code ready and please get in touch with us at Alfresia on the contact options below: SAP Code: JT06520206 Phone: 0330 002 1600 (Mon – Fri 9am to 5pm) Email: support@alfresia.co.uk...
Need help?
Do you have a question about the JT06520206 and is the answer not in the manual?
Questions and answers