quokkabeds Bed Base Assembly Manual

Bed Base Assembly Guide
Recommended: view the video at quokkabeds.com.au/videos!
N o t e : y o u m a y n o t i c e a s m a l l
g a p o n e a c h c o r n e r - t h i s i s
o n e o f o u r e s s e n t i a l d e s i g n
f e a t u r e s t o s t o p a n y p o t e n t i a l
w o o d - o n - w o o d s q u e a k !

Step 1: Side rails

Starting at any corner, clip the
side rails on to each of the end
pieces. Note: All brackets on the
bed are designed to be tight,
please apply force to ensure
they are fully seated.
'Stuck' bracket: When
disassembling, if brackets don't
unclip, grab any slat and tap
upwards beneath the beam.
E x t r a S t e p : F l o a t i n g B a s e
Rest both side rails on the
cross beam before attaching
the front piece. The legs are T
shaped, ensure the top of the T
faces the foot of the base.
Then, twist the 2 included
screws in with the Allen key.
PAGE 2