Table of Contents
Advertisement
Cleaning/Lubricating
Cleaning/Lubricating
Clean and lubricate the nose of the tool after heavy use
Clean and lubricate the nose of the tool after heavy use (5000 rivets) or if the tool
becomes contaminated with dust and debris.
(5000 rivets) or if the tool becomes contaminated with
1. Remove battery pack.
dust and debris.
2. Remove the nose housing from the tool and the nose piece from the housing.
1. Remove battery pack.
3. Press the spring, remove the guide (with jaws), pusher tube from the tool.
2. Remove the nose housing from the tool and the nose
piece from the housing.
4. Clean all pieces with a dry cloth and inspect for damage.
3. Press the spring, remove the guide (with jaws), pusher
5. Apply a small amount of lubricating oil to the pieces and reassemble. Ensure the jaws
4. tube from the tool.
are properly seated in the guide. Ensure the guide is properly seated in the pusher tube.
！WARNING
4. Clean all pieces with a dry cloth and inspect for damage.
To reduce the risk of personal injury and damage, never immerse your
5. Apply a small amount of lubricating oil to the pieces and
tool, battery pack or charger in liquid or allow a liquid to flow inside them.
reassemble. Ensure the jaws are properly seated in the guide.
Cleaning
Ensure the guide is properly seated in the pusher tube.
！WARNING
Clean dust and debris from vents. Keep handles clean, dry and free of oil or grease. Use
To reduce the risk of personal injury and
damage, never immerse your tool, battery pack or charger
only mild soap and a damp cloth to clean, since certain cleaning agents and solvents are
harmful to plastics and other insulated parts. Some of these include gasoline, turpentine,
in liquid or allow a liquid to flow inside them.
lacquer thinner, paint thinner, chlorinated cleaning solvents, ammonia and household
detergents containing ammonia. Never use flammable or combus- tible solvents around
Cleaning
tools.
Clean dust and debris from vents. Keep handles clean, dry and free of oil or grease. Use
only mild soap and a damp cloth to clean, since certain cleaning agents and solvents are
harmful to plastics and other insulated parts. Some of these include gasoline, turpentine,
CONTACT US
lacquer thinner, paint thinner, chlorinated cleaning solvents, ammonia and household
Email: support@girapow.com
detergents containing ammonia. Never use flammable or combus- tible solvents around
tools.
Website: www.girapow.com
CONTACT US
Email: support@girapow.com
Website: www.girapow.com
- 7 -
- 7 -
Nose
piece
Nose
housing
Guide
Jaws
Pusher
tube
Spring
Advertisement
Table of Contents
Need help?
Do you have a question about the LD803L and is the answer not in the manual?