Advertisement
Assembly Instructions For Aero Toddler Bed
For assembly help or replacement parts, please email info@littlecolorado.com
Parts
Footboard -
Assembly Steps
Mattress Supports
(2 pcs)
Joint Connector Bolts
and Barrel Nuts (8 ea)
Bolt and Barrel Nut Closeup
- Headboard
Insert one of the mattress supports into
the slot of one of the side-rails.
Attach the headboard by aligning the
holes of the side-rail with the holes on the
edge of the headboard. Make sure the
mattress support fits into the groove of
the headboard. Loosely insert the
screws into the barrel nuts which go into
the corresponding hole on the
headboard. Do not completely tighten
the screws. Repeat for the footboard.
Then slide the second mattress support
into the grooves of headboard and
footboard.
Advertisement
Table of Contents
Related Manuals for Sodura Aero Toddler Bed
Summary of Contents for Sodura Aero Toddler Bed
- Page 1 Assembly Instructions For Aero Toddler Bed For assembly help or replacement parts, please email info@littlecolorado.com Parts Bolt and Barrel Nut Closeup Mattress Supports (2 pcs) - Headboard Joint Connector Bolts Footboard - and Barrel Nuts (8 ea) Assembly Steps Insert one of the mattress supports into the slot of one of the side-rails.
- Page 2 Finally, attach the second side-rail by aligning the groove with the mattress support edges and aligning the holes on the edge of the headboard and footboard. Loosely tighten all screws. Ensure that the platform is completely in the groove on all sides and then, fully tighten all screws on both side-rails.
Need help?
Do you have a question about the Aero Toddler Bed and is the answer not in the manual?
Questions and answers