Table of Contents
Advertisement
Quick Links
Before using your
recommend reading this guide to
prevent any damage that could occur
due to misuse.
We also recommend registering your
product on our website to activate your
2 year warranty.
Visit:
www.sleephalo.com/register
Package Contents
SleepHalo™
Charger Base
Compatibility for Wireless Charging
has been designed to be compatible with Qi enabled phones. A list
SleepHalo™
can be found on our website.
If your phone is not wireless compatible it can still be used with your existing
wired charger by placing the plugged-in phone onto SleepHalo™. You will then
benefit from the radiation protection offered by SleepHalo™.
SleepHalo™
User Manual V1.1 E&OE
we
SleepHalo™
Radiation Shield
LED Indicator
1M Cable
Power Adapter (UK)
Page 1 of 6
Advertisement
Table of Contents
Summary of Contents for Angel Electronics SleepHalo
- Page 1 If your phone is not wireless compatible it can still be used with your existing wired charger by placing the plugged-in phone onto SleepHalo™. You will then benefit from the radiation protection offered by SleepHalo™.
- Page 2 Connecting your SleepHalo™ Decide which side of the bed you wish to place your SleepHalo™, noting that the raised protection shield should be between you and the phone. On the underside of the product you can route the power cable in 2 directions. Choose which route is best, plug in the connector to the power port and clip the cable through the rebated area.
- Page 3 To charge wirelessly, the phone must be placed onto with the screen SleepHalo™ facing up. The indicator LED on the side will change from red to blue once phone is correctly placed. Place the phone on the centre of SleepHalo™. Outline of phone Use logo for alignment LED Indicator If the red LED flashes, this indicates the phone is not aligned correctly.
- Page 4 How to position SleepHalo™ on bedside table When positioning SleepHalo™, position it so that when you are laying down you cannot see the screen of your phone. Radiation Shield has rubber feet attached to the bottom to prevent it slipping. If you SleepHalo™...
- Page 5 SleepHalo™ • Input: 5V 1A • Output: 5W • Wireless Range : 5mm is a trade mark is a trade mark of Angel Electronics Ltd © SleepHalo™ Angel Electronics Silverstone Technology Park, Silverstone, NN12 8GX info@angelelectronics.com SleepHalo™ User Manual V1.1 E&OE...
- Page 6 - Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. - Consult the dealer or an experienced radio/TV technician for help. is a trade mark is a trade mark of Angel Electronics Ltd © SleepHalo™ Angel Electronics Silverstone Technology Park, Silverstone, NN12 8GX info@angelelectronics.com SleepHalo™...
Need help?
Do you have a question about the SleepHalo and is the answer not in the manual?
Questions and answers