Maisense Freescan Quick Start Manual

www.maisense.com
131-MS013-0001 vr.00 support@maisense.com
線上教學
Black sticker mark is the best location of pressing pulse.
Quick Start Guide A-D
Set up
Measure
Pair
Calibrate
A
Set up
Initial configuration
Input your language, the current time and personal
data using the Up/ Down, and Set buttons.
Input data will affect the correctness of the measurement.
B
Measure
Step 1
Sit down. Put both hands
on the table and relax your
shoulders.
Your left wrist is between
your heart and leg while
measuring.
Step 2 Con rm the location of
your pulse
Bend the left palm outward
naturally.
Use your right fingers to find
the pulse along the radial
artery ( red line ) of your left
wrist.
Stickers
Sticker
Affix the auxiliary sticker on
the pulse you just found.
Confirm the auxiliary sticker on the correct pulse
position.
Step 3 Position of ngers
Hold with your
right fingers.
You right thumb and middle
fingle must maintain contact
with the two ends of the
ECG sensors A2.
Step 4
Start measurement
Put your forearms and elbows
on a table to get the measure-
ment easily and stably.
B
Align the black spot on the device
with the black spot on your left
wrist to get a measurement.
A
Press the start button with proper
force and place the pulse sensor
over the pulse location.
Ensure that the auxiliary
Press and hold the start button
stickers are aligned.
until the measurement is done.
Do not move or shake your
Please do not move during
head, body or the device
measuring. B
during the measurement.
Step 5 Observe pulse indicator
while measuring
The pulse indicator blinks green
at the same frequency when
your pulse is detected and
measuring.
10
NO shake until you hear a beep.
The measurement takes approxi-
mately 10 sec.
If you can't get results of step 6, please find Error message in
the back page.
Step 6
Results
The measurement has succeeded when you see
this screen. You can read your blood pressure
from the screen.
Measurement date
Measurement time
Systolic pressure
Stress level
Measurement status Heart rate
Event
User
A