Related Manuals for Wayhom W1010A
Summary of Contents for Wayhom W1010A
- Page 1 MOTION ACTIVATED SECURITY LIGHT W1010A Please read these instructions thoroughly prior to installation, then store in a safe place for future reference.
- Page 2 LED MOTION SENSOR LIGHT PARTS LIST M4*25MM M4*60MM A: Screw (Painted Green) / Qty. 1 B: Machine Screw / Qty. 2 B1: Machine Screw / Qty. 1 C: Ring/Qty. 1 Nut / Qty. 1 D: Wire Nuts / Qty. 3 E: Crossbar / Qty.1 F: EVA Gasket / Qty.1 TOOLS REQUIRED (not included)
- Page 3 PREPARATION Before beginning installation of product, make sure all parts are present. Compare parts with parts list. If any part is missing or damaged, do not attempt to install the product. Estimated Assembly Time: 30-60 minutes Tools Required for Assembly (not included): Phillips Screwdriver, Flat-head Screwdriver, Step Ladder, Pliers, Silicone Sealant, Eye Protection.
- Page 4 IMPORTANT: After mounting the LED sensor light, apply silicone sealant completely around the perimeter of the cover plate where the back of the cover plate meets the mounting surface. Silicone sealant prevents water from seeping into the junction box. CAUTION: Make sure motion detector head is not UPSIDE DOWN! Rotate the motion sensor so that controls face toward to the detection areas.
-
Page 5: Troubles Shooting
USING THE MOTION LIGHT The motion light has many time and detection distance settings. Please take the time to read through the options below to decide how best to utilize the light for home security purposes. 1) TIME : allows the choice of timed activation. TEST : this selection allows the light to be activated with motion for up to five seconds regardless of ambient light. - Page 6 Customer Service 2-Year limited warranty Lifetime techinical support Customer Service Please Email to: support@wayhom.online Wayhom is a trademark of LEDMAN ELECTRONIC TECHNOLOGY (HK) CO., LIMITED. Tung Lee Building, KL, Hong Kong. All rights reserved.