MAXLOAD 93742 User Manual

Rooftop rack with awning

Advertisement

ROOFTOP RACK WITH AWNING

WARNING AND SAFETY INFORMATION

• DO NOT ATTEMPT TO SET UP AWNING IN WINDY CONDITIONS.
• ALL GUY ROPES MUST BE ATTACHED AND PEGGED TO THE GROUND AT
ALL TIMES.
• GUY ROPES ARE TRIP HAZARDS IN THE DAY AND NIGHT.
• KEEP ALL FLAME AND HEAT SOURCES AWAY FROM THE AWNING.
• UNDER NO CIRCUMSTANCE SHOULD ANY NAKED FLAME SOURCES OR
HEATING DEVICES BE USED UNDER OR NEAR THE AWNING.
• LOOK OUT FOR ANY AIRBORNE BURNING EMBERS THAT MAY COME INTO
CONTACT WITH THE AWNING.
• DO NOT OPERATE ANY DEVICE WHICH BURNS FUEL INSIDE OF THE AWNING.
KEEP EXIT CLEAR DURING TRIPS.
• REGULARLY CHECK THAT ALL NUTS AND BOLTS ARE ATTACHING TO YOUR
VEHICLE TIGHTLY AND IN GOOD CONDITION.
User Manual
93742

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 93742 and is the answer not in the manual?

Questions and answers

Summary of Contents for MAXLOAD 93742

  • Page 1 93742 User Manual ROOFTOP RACK WITH AWNING WARNING AND SAFETY INFORMATION • DO NOT ATTEMPT TO SET UP AWNING IN WINDY CONDITIONS. • ALL GUY ROPES MUST BE ATTACHED AND PEGGED TO THE GROUND AT ALL TIMES. • GUY ROPES ARE TRIP HAZARDS IN THE DAY AND NIGHT.
  • Page 2 INSTALLATION Option 2 Option 1 Installed on Cross bars Installed on Roof racks Slide the small bolts into the mounting rail of the awning, raise the awning and Align awning into the position of the shorter part of the L bracket, screw together with supplied bolts. Check all nuts and bolts periodically.
  • Page 3 SET UP INSTRUCTIONS...
  • Page 4 1. Undo the zip on the PVC bag, and release the buckles which hold the awning in place. 2. Unfold the awning to its full length. 3. Release the legs of awning to desired height and tighten the locator. 4. Release the rafter arms of the awning and insert it into mounting holes and tighten the locator.

Table of Contents