Advertisement
Quick Links
______________________________________________________________________________
Welcome to the Easy Time Clock US100C Fingerprint Reader quick easy setup instructions. Before using,
please read this manual carefully to avoid unnecessary damage!
Please don't place the product in the place with strong light, because the strong light may significantly
affect the fingerprint scanning, and thus cause the fingerprint verification to fail.
Don't place the terminal in an area where the temperature exceeds 104F or 040C. US100C proper working
temperature range is 104F or 040C. If the temperature of the machine gets too hot, the device will be
affected easily, such as, the slower reaction speed and the reduced passing rate. If mounted outdoors,
place the unit in a shaded well ventilated area and/or use cooling equipment to keep the area
temperature controlled.
There are five easy steps to configure your reader. Approximate setup time is 10/15 minutes. Call
Customer Service if you need any assistance.
STEP 1
Setup US100C– Install unit on wall with Ethernet connection according to instructions
1) Power on the system will boot up and the reader will then search for your network.
a. Starting Network will display a plane black box.
b. Searching for server will display a green letter "I" in the black box.
c. Connected to server will display a green box in the upper right corner.
STEP 2
Download Your Employee Names From your Easy Time Clock account
1) Login as Admin into your Easy Time Clock account
2) Go to Main Menu | Employee Maintenance | Payroll
Setup page to enter the Employee # for each employee. The
reader requires and employee number to identify the
employee. Maximum character numbers is 5 digits. The
employee # and passwords need to be all numbers not
starting with zero.
Easy Time Clock LLC
Customer Service 405-314-2436
Biometric Fingerprint Reader
Setup Instructions
Customer Service 405-314-2436
Look for the Easy Time Clock logo
display to easily see the black box.
The reader will use DHCP to find
your network.
©2003 - 2012 Easy Time Clock, All Rights Reserved
I
Page 1 of 7
Advertisement
Summary of Contents for Easy Time Clock US100C
- Page 1 Don’t place the terminal in an area where the temperature exceeds 104F or 040C. US100C proper working temperature range is 104F or 040C. If the temperature of the machine gets too hot, the device will be affected easily, such as, the slower reaction speed and the reduced passing rate.
- Page 2 Maintenance | Fingerprint and ID Card Clock Download Fingerprint and ID Card Clock Download page and make sure your US100C is listed. 4) Select the employees to download to the US100C and click to download to the US100C and click the Download button (Request Processed) (Request Processed) **To see the downloaded employee list in the terminal go to M/OK –...
- Page 3 Employee can now clock in and out using just the fingerprint without a password. When print is accepted the system will show the name of the employee and the clock in or out time displayed. 2) Look at the Detailed Report in Easy Time Clock to see the clock in. Page 3 of 7...
- Page 4 ______________________________________________________________________________ ______________________________________________________________________________ Now your employees are ready to use the US100C to clock in and out. Now your employees are ready to use the US100C to clock in and out. Now your employees are ready to use the US100C to clock in and out.
-
Page 5: Change Password
314-2436 ______________________________________________________________________________ ______________________________________________________________________________ ______________________________________________________________________________ Change Password: 1) At the US100C, go into User Management User Management and Manage means this employee is the administrator. means this employee is the administrator. means password has been enrolled means password has been enrolled... - Page 6 Customer Service 405-314-2436 ______________________________________________________________________________ T9 Input T9 means “Text on 9 keys.” It is commonly used on cell phones. The US100C uses a combination of keys to enter uppercase, lowercase, and symbols. Here is an overview: Arrow to get to the name text field, press the right arrow */ and you will see a gray bar at the bottom of the screen with the word [English] .
-
Page 7: Cleaning Guidelines
If you see lint on the lens, lightly blow air on the lens after the sensor is dry. Do Not Use Cotton or Alcohol Wipes. Page 7 of 7 Easy Time Clock LLC Customer Service 405-314-2436 ©2003 - 2012 Easy Time Clock, All Rights Reserved...