Arena Company PREMIER EQUESTRIAN Setup Instructions

14. Build Out First Short Side – Continue assembly of the post and rail using
the method described above. The guide string between the corner stakes is
used to keep the line straight as you build to the next corner.
15. Build Out Second Long Side – As above.
16. Build Out Second Short Side and Gate Area – As above. Use the end
posts for entrance gate.
17. Hammer In Stakes – Hammer in all stakes till they are flush with the top
of the posts. CAUTION: Hitting the PVC post with your hammer may dam-
age the post.
18. Place Caps on Posts – Secure caps
on post tops. Use decorative caps on
end posts at entrance gate.
MAINTAINING YOUR NEW
DRESSAGE ARENA
To clean your arena use warm water and a mild detergent like dishwashing
soap. Use a large sponge or soft cloth because abrasives may scratch the fin-
ish. To get out real stubborn stains you can use mineral spirits followed
by a water rinse. Be careful because mineral spirits can damage the finish if
left on too long.
www.PremierEquestrian.com
800.611.6109
SET-UP INSTRUCTIONS FOR
20 x 60 JUNIOR CLASSIC ARENA
If you should have any difficulty or question please call us at 800-611-6109.
Please take a moment to read through the entire directions before setting up
your Premier Equestrian Arena. These instructions will guide you step-by-
step through the process of assembly.
Included in your shipment:
56 Rails
50 Line Posts
4 Corner Posts
2 End Posts
2 Decorative Gate Caps
54 Post Caps
56 Post Stakes
2 Gate Sleeves w/screws
21 sections on 60 meter side
7 sections on 20 meter side

PREPARATION

1. Drag or blade the arena area —
as level and smooth as possible.
2. Locate and count all parts.
Separate line posts, corner posts,
and end posts.
What you need:
Hammer
60 Meter Tape Measurer
160 Meters of String
Screwdriver (Phillips head)
LINE POST
AND RAIL
LINE POST CORNER POST GATE POST