Summary of Contents for Anchor Systems 46913
- Page 1 20-30L Hydraulic Power Pack OPERATING INSTRUCTIONS AND TECHNICAL INFORMATION www.anchorsystems.co.uk...
-
Page 2: Table Of Contents
Contents 01342 719 362 These instructions give safety and operations information regarding the use of a Information.................4 trailer mounted Hydraulic Power Pack supplied by Anchor Systems (International) Ltd. They contain the relevant information for products: Safety Instructions…...............4 Daily Check Items................5 Hydraulic Power Pack..............6... -
Page 3: Information
Have any questions? Information Daily Check Items 01342 719 362 For further details on location and service parts see Routine Maintenance. Your Hydraulic Power Pack has been individually built with great emphasis on quality, strength and simplicity of design and with routine care will give many years of trouble free operation. -
Page 4: Hydraulic Power Pack
Have any questions? Hydraulic Power Pack Power Pack Operation 01342 719 362 The safe operation of this equipment is the responsibility of the operator. PRE-OPERATION CHECK LIST 1. Keep bystanders away from the machine. 2. Ensure you are aware of the environment you are working in; including overhead cable, underground installations etc. - Page 5 Have any questions? Power Pack Operation Power Pack Operation 01342 719 362 Figure 2 – Auto-Throttle and Pull Cord Figure 4 - Engine On-Off Switch Figure 3 - Flow Control Valve Block (OFF) Figure 5 - Oil Level Gauge www.anchorsystems.co.uk...
-
Page 6: Oil Flow Control
Throttle Lock UNAUTHORISED MODIFICATION • Any modifications made without authorisation from Anchor Systems (International) Ltd can ad- versely affect the performance of the machine and they may also create hazards. • Before making a modification, consult Anchor Systems (International) Ltd. Anchor Systems (Inter- national) Ltd will not be responsible for any injury or damage caused by any unauthorised modifi- cation. -
Page 7: Operating Safety
Have any questions? Operating Safety Routine Maintenance 01342 719 362 Engine - refer to Vanguard 6.5 operator’s manual for service intervals. Oil Dipstick - located at the right side of the engine Hydraulic return filter- Located on the left of the power pack. For safe use, ensure all these points are followed: Hydraulic Oil Reservoir - Oil suction filler is inside the oil reservoir. - Page 8 Have any questions? Routine Maintenance Service Information 01342 719 362 SERVICE SCHEDULE The service schedule of machine items is as follows: SERVICE INTERVAL Figure 9 - SERVICE ITEM Oil Filler Breather 10 Hours 50 Hours 500 Hours 1000 Hours Daily Weekly 6 Months Annually...
-
Page 9: Troubleshooting
Have any questions? Troubleshooting Spare Parts - Hydraulics 01342 719 362 CODE DESCRIPTION 46885 HYDRAULIC ASSEMBLY SYMPTOM POSSIBLE CAUSE ACTION CODE DESCRIPTION QUANTITY 46886 Hose 1 Won’t Start Engine cut off switch set to OFF Turn switch to ON 46892 Hose 2 46893 Hose 3... - Page 10 Have any questions? Spare Parts - Power Pack Spare Parts - Power Pack 01342 719 362 CODE DESCRIPTION 49050 POWER PACK ASSEMBLY CODE DESCRIPTION QUANTITY 46835 Tank Mounting Plate 11885 Fan Blade 11886 Oil Cooler 46901 Fan Retainer 46861 Fan Adaptor 46888 Midipac Reservoir Assembly 46889...
- Page 11 Have any questions? Spare Parts - Engine Spare Parts - Engine 01342 719 362 CODE DESCRIPTION 46889 POWER PACK ENGINE ASSEMBLY CODE DESCRIPTION QUANTITY 11883 Bell Housing 11882 Flexible Coupling 11884 Pump 01097 Adaptor 2182 Seal 02977 Washer M8 (Form C) 08017 Bolt Cap M6 x 25 11893...
- Page 12 Have any questions? Spare Parts - Reservoir Spare Parts - Reservoir 01342 719 362 CODE DESCRIPTION 46888 RESERVOIR ASSEMBLY CODE DESCRIPTION QUANTITY 11877 Oil Level Gauge 11890 Return Bush 46848 Midipac Suction Adaptor 01126 Elbow 012 SW MF BSP rh447 Suction Strainer 11874 Breather Filler w/strainer...
- Page 13 Have any questions? Spare Parts - Main Valve Spare Parts - Auto Throttle 01342 719 362 CODE DESCRIPTION CODE DESCRIPTION 46890 MAIN VALVE ASSEMBLY 49600 AUTO THROTTLE ASSEMBLY CODE DESCRIPTION QUANTITY CODE DESCRIPTION QUANTITY 46867 Main Valve Assembly 48666 Throttle Ram Assembly 01097 Adaptor 008 MM BSP 49532...
-
Page 14: End Of Life
Have any questions? End Of Life Risk Assessment – 01342 719 362 Operation Of Power Pack 20- 30l When the machine reaches the end of its useable lifetime it is important that the inde- pendent elements of the machine are reused, recycled, or disposed of suitably. SECTION 1: ASSESSMENT INFORMATION ASSESSMENT DATE 17/03/2020... -
Page 15: Section 3: Control Measures
9. Prestart check carried out and any faults reported immediately. 10. Keep away from the engine exhaust while or after engine has been running, for reasonable amount of time. FURTHER ACTION REQUIRED: NO FURTHER ACTION REQUIRED Prepared By Anchor Systems (International) Ltd www.anchorsystems.co.uk... - Page 16 FOR TECHNICAL ADVICE OR FURTHER INFORMATION PLEASE CONTACT: ANCHOR SYSTEMS (INTERNATIONAL) LTD Unit 44 - 46, Rowfant Business Centre, Rowfant, West Sussex RH10 4NQ Tel: +44 (0)1342 719 362 Email: info@anchorsystems.co.uk Web: www.anchorsystems.co.uk UVDB QUALIFIED www.anchorsystems.co.uk PP06082021 VULC010418...
Need help?
Do you have a question about the 46913 and is the answer not in the manual?
Questions and answers