Advertisement
Quick Links
Slim Emergency Phone + GSM Kit
Page 2 Firmware history
Page 3 General Description
Page 4 Specifications
Page 5 Connection diagram
Page 6 Device Programming
Page 7,8 Basic Programming
Page 9 Make an emergency telephone call
Page 10 EU Compliance
Page 11,12 Certifications
Please read carefully the instructions in order to get all
the benefits of this device.
INTD0902
Reference Manual
www.pelekis.eu
Rev. 1.0 June 2017
Advertisement
Summary of Contents for PELEKIS INTD0902
- Page 1 Reference Manual INTD0902 Slim Emergency Phone + GSM Kit Page 2 Firmware history Page 3 General Description Page 4 Specifications Page 5 Connection diagram Page 6 Device Programming Page 7,8 Basic Programming Page 9 Make an emergency telephone call ...
- Page 2 Version history V1.0 06/2017 initial firmware development PELEKIS ELECTRONICS ISO9001/2015 Rev. 1.0 June 2017...
-
Page 3: General Description
General Description: The INTD0902 is an emergency phone that can operate only in conjunction with our GSM device. It is placed inside the elevator car and can call up to 4 stored telephone numbers in case of emergency. These 4 numbers are stored in the GSM Internal memory and the emergency call progress operation is completely executed from the GSM device. -
Page 4: Specifications
Audio controls Microphone to Loudspeaker balance trimmer Microphone sensitivity - 46dB ± 2.0, ( 0 dB = 1V / Pa ) at 1K Hz. Loudspeaker sensitivity 91dBA (@ 10cm) Dimensions 196x89x22 Weight 170gr PELEKIS ELECTRONICS ISO9001/2015 Rev. 1.0 June 2017... -
Page 5: Connection Diagram
When there is an Internet line connected, a filter ADSL should be placed in the terminal “LINE”. When there is a line of VOIP (Voice Over IP), the INTD0902 device should get signal from the modem and not directly from the line. - Page 6 Step 1: Make sure a GSM device is connected with our Slim emergency phone device (INTD0902) and a SIM card is inserted into the socket. In order to ensure that GSM device is working properly and a stable connection with a telephone provider has been established, the blue LED should be blink (1s ON - 5s OFF).
- Page 7 (speak). x = # The option is disabled. The device will send 4 digit DTMF tones . Change the device ID of the INTD0902. #088nnnn 0000 nnnn = 4 numbers which will represent the new device identity (ID).
- Page 8 Before performing any adjustment, wait until you hear 2 beeps #093 < # > (OK). All memory stored in the INTD0902, will be copied to the GSM’s simcard. All calling progress (busy, not answer and mobile provider ) will be moderated from the GSM’s microcontroller for more flexibility...
-
Page 9: Terminating A Call
By holding the “BUTTON” key for time equal to “#095” command code value (default 3sec), the device will start the calling procedure. Terminating a call The device will automatically terminate the calling procedure after the 1st established connection has been terminated. PELEKIS ELECTRONICS ISO9001/2015 Rev. 1.0 June 2017... - Page 10 For electromagnetic compatibility (Directive 89/336/EEC) For safety (Directive73/23/EC) ANCO SA 20/12/2003 EN 60950 § 2.1.4,2.2.3,6.1,6.2,6.2.1,6.2.1.1,6.3.1,6.3.2 For efficiency, Certificate No. 2667 17/10/2003 OTE SA TBR21, TBR38 KAI ETS300-001. For EN 81-28 4,5,6 & 7 EVETAM LF/AC-1155/09. PELEKIS ELECTRONICS ISO9001/2015 Rev. 1.0 June 2017...
- Page 11 “ SERIALNumber(s): FROM Product types : INTD0902 Conforms with the essential requirements of the emc directive 89/336/EC and the Radio & Telecommunications Terminal Equipment directive 1999/5/EC and satisfies all the applicable standards to the product within this directives as follows: Emission EN 55022/ΕΝ12015...
- Page 12 PELEKIS ELECTRONICS ISO9001/2015 Rev. 1.0 June 2017...