Eco One E-1 User Manual

Eco One
User Manual
Generating Electrolyzed
Water for Cleaning
& Sanitation
Generates hypochlorous acid (HOCl) with an
ORP between +800 and +1000 (setting 3)
1. Add tap water (or purified water) up to the 1 Liter mark
2. Add 2 grams of kosher salt *
3. Add 1 tsp. of distilled white vinegar (5%) **
(optional but recommended to optimize pH)
4. Replace lid and connect power supply ***
5. Power On to generate hypochlorous acid
* Use only food grade salt (NaCl). It is recommended to
use pure and natural salt without iodine.
** Adding vinegar will lower pH therefore allowing
hypochlorous acid (HOCl) to be the dominant free
chlorine molecule.
*** Power supply connector must be dry.
1
2
3
4
5
6
Instructions for safe use
Generating Electrolyz
Generates hypochlorous acid (H
ORP between +800 and +1000 (s
1.
2.
1. Add tap water (or purified water) u
3.
4.
2. Add 2 grams of food grade salt (N
7
5.
3. Add 1 tsp. of distilled white vinega
6.
(optional but recommended to opt
7.
8.
4. Place lid and plug-in the power su
8
Press to Power On
Press once for Setting 1
Press twice for Setting 2
Press three times for Setting 3
Setting 3 – System runs for 8 minutes
Filled to 1 Liter mark – generates 100 ppm
Run 2 cycles (16 min.) to generate 200 ppm
Setting 2 – System runs for 5 minutes
Filled to 1 Liter mark – generates 60 ppm
Setting 1 – System runs for 3 minutes
Filled to 1 Liter mark – generates 40 ppm
*Use only food grade salt (NaCl). It is reco
**Adding vinegar will lower pH therefore al
***Power supply must be dry.
provided throughout
this manual.
Lid
Power On/Off
Settings 3
Settings 2
Settings 1
Power Connection
One gram spoon
Power supply
Press to Power O
Press once for Se
Press twice for Se
Press three times
Setting 3 – Sy
Filled to 1 Lite
Filled to 0.5 Li
Setting 2 – Sy
Filled to 1 Lite
(for sanitizing
Setting 1 – Sys
Filled to 1 Liter