Summary of Contents for RILYSON SS009
- Page 1 SKU#SS009 For any missing or damaging parts, hardware, or any other problems, WELCOME to email us at:...
-
Page 2: Hardware List
• Please read through the instructions before beginning assembly. • Two adults are recommended for assembly. • Clear out the space for assembly and lay out all of the parts based on the Parts List, extra room will allow you to easily determine if all the pieces are present. •... - Page 3 STEP-BY-STEP ASSEMBLY: Step 1: Attach left arm (A) and right arm (B) to chair back (C) with 4 long bolts (F) and 4 washers (G) using hex key (H). Do not fully tighten bolts. Step 2: Attach seat panel (D) to chair back (C) with 2 long bolts (F) and 2 washer (G) using hex key (H).
- Page 4 Step 3: Attach seat panel (D) to left arm (A) and right arm (B) with 4 short bolts (E) and 4 washer (G) using hex key (H). Verify the alignment and adjust, then fully tighten all the bolts. Step 4: Turn over the assembled chair, and put the seat cushion (I) and back cushion (J) onto the chair.
- Page 5 SKU#SS010 For any missing or damaging parts, hardware, or any other problems, WELCOME to email us at:...
- Page 6 • Please read through the instructions before beginning assembly. • Two adults are recommended for assembly. • Clear out the space for assembly and lay out all of the parts based on the Parts List, extra room will allow you to easily determine if all the pieces are present. •...
- Page 7 STEP-BY-STEP ASSEMBLY: Step 1: Attach the 4 legs (B) to table top (A) by 8 bolts (D) and 8 washers (F) with hex key (G). Do not fully tighten bolts now. Step 2: Attach table tray (C) to 4 table legs (B) by 4 bolts (E) and 4 washers (F) with hex key (G).
- Page 8 SKU#SS011 For any missing or damaging parts, hardware, or any other problems, WELCOME to email us at:...
- Page 9 • Please read through the instructions before beginning assembly. • Two adults are recommended for assembly. • Clear out the space for assembly and lay out all of the parts based on the Parts List, extra room will allow you to easily determine if all the pieces are present. •...
- Page 10 STEP-BY-STEP ASSEMBLY: Step 1: Attach left arm (A) and right arm (B) to chair back (C) with 4 long bolts (F) and 4 washers (G) using hex key (H). Do not fully tighten bolts. Step 2: Attach seat panel (D) to chair back (C) with 3 long bolts (F) and 3 washer (G) using hex key (H).
- Page 11 Step 3: Attach seat panel (D) to left arm (A) and right arm (B) with 4 short bolts (E) and 4 washer (G) using hex key (H). Verify the alignment and adjust, then fully tighten all the bolts. Step 4: Turn over the assembled chair, and put the seat cushion (I) and back cushion (J) onto the chair.
Need help?
Do you have a question about the SS009 and is the answer not in the manual?
Questions and answers