1. Manuals
  2. Brands
  3. celios Manuals
  4. Air Cleaner
  5. G200
  6. Quick start manual

celios G200 Quick Start Manual

Advanced air purifier
Hide thumbs Also See for G200:
Table of Contents

Advertisement

Quick Links

Download this manual
Quick Start
G200
Advanced Air Purifier

Advertisement

Table of Contents
loading

Related Manuals for celios G200

Summary of Contents for celios G200

  • Page 1 Quick Start G200 Advanced Air Purifier...

  • Page 2: Step 1: Installing The Air Filters

    STEP 1: INSTALLING THE AIR FILTERS The G200 uses three powerful air filters. All are colored blue for easy identification. Installing the Core Filter Slide the Core Filter into the G200 Core with the grill facing up. The filter clicks into place when properly...
  • Page 3 Installing the Pre Filter Turn the G200 Core over so the Celios logo is facing down. Remove the back panel at the bottom of the unit. Slide the Pre Filter into place with the arrows pointing toward the top of the Core. Make sure to push the Pre Filter completely into the Core so that the back panel can fully close.

  • Page 4: Installing The Carbon Filter

    1. Remove the Carbon Filter tray from the Main Stand. 2. Place the Carbon Filter into the tray as shown. 3. Slide the tray back into position in the G200 Main Stand. The tray clicks into place when properly installed.
  • Page 5 STEP 2: INSTALLING THE LITHIUM ION SMART BATTERIES The G200 runs on either outlet power or Lithium Ion Smart Batteries, which are included with your G200 purchase. These batteries are hot swappable, which means you can remove either of them without shutting down the G200 or interrupting air purification.
  • Page 6 Note you will not hear a beep with the second battery. When installed properly the Celios logo on the batteries will be as pictured in the illustration. Place the silver wire back into position and replace the back cover onto the G200 Core unit.
  • Page 7 When you correctly dock the G200 Core in the Main Stand, the unit will beep (whether you have AC power or not). If the G200 Core is not properly installed, it will not beep and will not sit properly within the Main Stand.

  • Page 8: Charging The Batteries

    When the batteries are fully charged or when there are no batteries in the G200 Core, the battery life indicator light will turn off. You can also charge the batteries outside of the Main Stand by plugging the Power Adapter directly into the G200 Core.
  • Page 9 Main Stand or plugged in directly. Allow the batteries to charge until full You may run the G200 on any setting while charging. Turn the unit on to Speed 1 and remove the power adapter plug.

  • Page 10: Step 3: Setting Up The Remote Control

    75 ft range. When not in use, store the remote control in the slot on the front of the G200 Main Stand. Pair the Remote Control with the G200 Core 1. Install the provided two AAA batteries into the Remote Control.

  • Page 11: Fan Speeds

    FAN SPEEDS The Celios G200 Advanced Air Purifier operates at four fan speeds, so you can adjust the power to best meet your needs. To select the fan speed you desire, press the fan speed button on the control panel or Remote Control to cycle through the speed settings.

  • Page 12: Customer Support

    Customer Support For troubleshooting please refer to the Celios G200 User Guide available at www.Celios.com/Support If you have any questions about your Celios G200 air purifier, please visit our website www.Celios.com/Support or contact us by phone or email: www.Celios.com • 1-833-CELIOS1 • customer.care@celios.com...

Table of Contents